Daniel Defense Delta 5 24" 6.5 Creedmoor Heavy Palma Barrel, 1:8 Twist, 5/8"-24 Thread, Cold Hammer Forged, Cobalt

The Daniel Defense Delta 5 24" 6.5 Creedmoor Heavy Palma barrel is a cold hammer forged, precision rifle component built for shooters who want modularity without the gunsmith bill. If you own a Delta 5 bolt-action rifle and want to add a second caliber to your rig—or simply swap in a fresh barrel—this factory-headspaced barrel makes it possible in minutes. The heavy Palma profile and 1:8 twist rate suit mid-to-long-range hunting and precision shooting, while the cobalt Cerakote finish delivers durability on the line and in the field.

Cold hammer forging is known for producing barrels that shoot tight and last. Because Daniel Defense sets headspace at the factory during barrel extension installation, you skip the gunsmith entirely. The barrel arrives ready to drop into your Delta 5 action. Loosen the barrel nut with the included wrench, swap the barrel, re-torque, reinstall the assembly in your stock, and you're ready to shoot. No special tools, no smithing knowledge required.

The 5/8"-24 TPI muzzle thread accepts standard suppressors or brakes, and the heavy Palma profile is stiff enough for consistent accuracy without excess weight. At 1.75 lbs, it won't bog down your gun. Whether you're building a dual-caliber platform or upgrading to a fresh tube, this barrel gives you the modularity that modern precision rifles demand.

Key Features

• Factory-set headspace—no gunsmith required for installation
• Cold hammer forged construction for accuracy and longevity
• Swappable barrel design compatible with Delta 5 systems
• Heavy Palma profile for precision shooting and hunting
• Cobalt Cerakote finish resists corrosion and wear
• 5/8"-24 muzzle threads for suppressors and muzzle devices
• Includes barrel nut wrench for quick swaps

Specifications

Frequently Asked Questions

Will this barrel fit my Delta 5 rifle?

Yes. This barrel is designed to work with Delta 5 systems via the included barrel extension and nut. The headspace is pre-set at the factory, so no gunsmith work is needed.

Do I need a gunsmith to install this barrel?

No. The barrel nut wrench is included. Simply remove your current barreled action, swap out the barrel, re-torque the barrel nut to spec, and reinstall the assembly in your stock. The factory-set headspace takes the guesswork out.

What twist rate does this barrel have?

This barrel features a 1:8 twist rate, suitable for the 6.5 Creedmoor cartridge and optimized for mid-to-long-range precision shooting and hunting.

Can I use a suppressor with this barrel?

Yes. The barrel is threaded 5/8"-24 TPI at the muzzle, which is the standard thread pitch for suppressors and muzzle devices compatible with this caliber and platform.