L.E. Wilson Bushing Type Full Length Sizing Die 6.5 Prc

The L.E. Wilson Bushing Type Full Length Sizing Die for 6.5 PRC gives precision reloaders a way to manage neck tension while sizing the case body in a single press stroke. Built from high-quality, hardened steel to L.E. Wilson specifications—harder than Grade 8 fasteners—this full-length sizing die is designed for shooters who want the control of a bushing system without the time cost of neck sizing alone. The die leaves approximately 3/16" of the case neck unsized, a technique many handloaders prefer for improved accuracy and case longevity.

This die fits standard 7/8"-14 reloading press threads and includes an adjustable depth decapping rod and a spare decapping punch. The stainless steel components resist corrosion, and the L.E. Wilson lock nut (0.225" thick, 0.270" tall, 1.250" OD) provides a solid platform for consistent headspace control. Note that this die does not include an expander; you'll control neck tension entirely through your choice of bushing.

Neck bushings are sold separately—L.E. Wilson and Redding bushings both fit this die. If you're stepping up from standard full-length sizing or you shoot precision rifle matches, hunting long-range, or load for consistency-critical cartridges like the 6.5 PRC, a bushing die gives you the accuracy advantage without the complexity of an entirely separate neck sizing step.

Key Features

• Bushing-type design for customizable neck tension control
• Leaves bottom 3/16" of case neck unsized for improved accuracy
• High-hardness steel construction, exceeding Grade 8 strength
• Adjustable depth decapping rod with spare punch included
• Stainless steel components for durability and corrosion resistance
• Fits standard 7/8"-14 reloading press
• Interchangeable with L.E. Wilson and Redding neck bushings

Specifications

Frequently Asked Questions

Do I need to buy neck bushings separately?

Yes. This die does not include a neck bushing. L.E. Wilson and Redding neck bushings will fit; you'll select the bushing size based on your desired neck tension and brass thickness.

What press does this die work with?

This die fits any reloading press with a standard 7/8"-14 thread, which covers most single-stage and turret presses on the market.

Does this die resize the entire case?

This is a full-length sizing die that resizes the shoulder and body. However, it intentionally leaves the bottom 3/16" of the case neck unsized; you control neck tension via the bushing you select.

What comes in the box?

The die includes an adjustable depth decapping rod and one spare decapping punch. Neck bushings are not included and must be purchased separately.