L.E. Wilson Bushing Type Full Length Sizing Die 6Mm Dasher

The L.E. Wilson Bushing Type Full Length Sizing Die for 6mm Dasher gives reloaders precise control over neck tension while sizing the case body in a single stroke. If you're building match-grade ammunition or just want to dial in your loads with accuracy, this die lets you choose your own neck tension instead of being locked into a one-size-fits-all approach. The bushing design leaves the bottom 3/16" of the neck unsized—a practice many precision shooters prefer because it can improve consistency and accuracy compared to sizing the entire neck.

Built from high-quality, hardened steel to L.E. Wilson specifications (harder than Grade 8 bolts), this die is made to last through thousands of rounds. The adjustable depth decapping rod and included decapping punch give you control over how you process fired brass. Because these dies don't contain an expander, you'll pair this with interchangeable neck bushings sold separately—L.E. Wilson bushings are the natural fit, though Redding bushings will also work if you already have them on hand. Everything threads into a standard 7/8" reloading press.

The stainless steel components resist corrosion, and the L.E. Wilson lock nut (.225" ID to OD, .270" height, 1.250" OD) is engineered for a secure, repeatable fit. Whether you're loading for a new 6mm Dasher build or upgrading from generic full-length dies, this is a serious tool for shooters who take their precision seriously.

Key Features

• Bushing-type design lets you select and customize neck tension with interchangeable bushings
• Sizes shoulder and body while leaving bottom 3/16" of neck unsized for improved accuracy
• Adjustable depth decapping rod with included extra punch
• No expander—works with L.E. Wilson or Redding interchangeable bushings (sold separately)
• High-quality hardened steel construction, harder than Grade 8 bolts
• Stainless steel components for corrosion resistance and durability
• Engineered L.E. Wilson lock nut for secure, repeatable setup
• Fits standard 7/8" reloading press mounting

Specifications

Frequently Asked Questions

What bushings work with this L.E. Wilson die?

L.E. Wilson neck bushings are the recommended choice and are sold separately. Redding bushings will also fit the die.

Is a neck bushing included, or do I need to buy one separately?

The die does not include a bushing. You'll need to purchase an interchangeable neck bushing separately to complete the setup.

What press can I use this die in?

This die fits any standard reloading press with a 7/8" die hole—single-stage, turret, and progressive presses all work.

Why does this die leave 3/16" of the neck unsized?

Partial neck sizing is a practice many precision shooters prefer because it can improve ammunition consistency and accuracy compared to sizing the entire neck. You get the benefits of full-length sizing for the shoulder and case body while preserving some of the work-hardening in the upper neck.