The EGW Tikka T3 0 MOA scope base gives you a modern Picatinny mounting platform for your Tikka T3 receiver without any gunsmithing. This one-piece aluminum rail mounts directly to your factory scope mount holes—no drilling, no tapping—and gets your scope to zero elevation right out of the box with its 0 MOA design. Whether you're building a precision rifle for long-range hunting or setting up a dependable repeater for the field, a quality scope base is the foundation every setup needs.
EGW machined this base from 6061 T6 aluminum extruded stock, then precision-gauged the Picatinny slots to MIL-STD 1913 specs (±.002") so you can mount any standard Picatinny or Weaver scope ring. The rigid construction and lightweight design mean you're adding minimal weight while gaining maximum flexibility—swap rings and scopes quickly by adjusting eye relief along the rail instead of hunting for new holes. A milled center channel on the tactical version keeps things lean for hunters and shooters who count ounces.
Installation is straightforward: the base uses socket head Torx screws (wrench included) that you torque to 20 inch-pounds with a dab of blue loctite. That's it. You're ready to mount your rings and glass.
Key Features
- 0 MOA design for direct mounting to Tikka T3 factory holes—no gunsmithing required
- One-piece Picatinny rail for fast scope and ring changes
- 6061 T6 aluminum construction—rigid and lightweight
- Picatinny slots gauged to MIL-STD 1913 specs (±.002") for precision fit
- Accepts Picatinny or Weaver scope rings
- Milled center channel reduces weight on tactical models
- Socket head Torx screws with wrench included
Specifications
| Brand | EGW |
| Firearm Compatibility | Tikka T3 |
| Mount Type | One-piece scope base |
| Elevation | 0 MOA |
| Rail Standard | Picatinny (MIL-STD 1913) |
| Ring Compatibility | Picatinny or Weaver |
| Material | 6061 T6 aluminum |
| Slot Tolerance | ±.002" |
| Installation | Factory mount holes, no drilling or tapping |
| Hardware | Socket head Torx screws with wrench; blue loctite recommended |
| Recommended Torque | 20 inch-pounds |
Frequently Asked Questions
Will this mount fit my Tikka T3 without modifications?
Yes. The EGW Tikka T3 0 MOA base is drilled to fit your factory scope mount holes directly—no gunsmithing, drilling, or tapping needed.
What scope rings can I use with this base?
Any standard Picatinny or Weaver scope rings will work. The Picatinny slots are gauged to MIL-STD 1913 specs for a reliable fit.
What does "0 MOA" mean and why does it matter?
0 MOA means the base sits flat with no elevation built in. This simplifies setup and allows your scope's elevation turret to manage all vertical adjustment, giving you the full range of your scope's adjustment capability.
How tight should I torque the mounting screws?
EGW recommends 20 inch-pounds of torque. Apply a small drop of blue loctite to the screws before installation. A socket head Torx wrench is included with the base.
