The EGW Tikka T3 0 MOA is a one-piece Picatinny scope base engineered for Tikka T3 bolt-action rifles. This mount lets you add modern optics flexibility without drilling or tapping your receiver—it uses the factory scope mount holes for a straightforward installation. Built from 7075 T6 aluminum and precision-machined to MIL-STD 1913 specs, it gives you a rigid foundation for your optic while keeping things light and keeping your scope closer to the barrel for potential accuracy gains.
The 0 MOA design ("zero angle") means the rail sits flat, letting you dial in windage and elevation entirely through your scope rings and turrets. The Picatinny cross-slots are gauged to +/–.002" and accept standard Picatinny or Weaver rings, so you have real flexibility in how you set eye relief and which optic you run. The mount comes with socket head Torx screws and a wrench, and EGW recommends 20 inch-lbs of torque with a drop of blue Loctite during installation.
If you're running a Tikka T3 and want to swap scopes without gunsmithing or re-zero hassles, this is a solid, no-frills base that handles the job cleanly. It's the kind of part that disappears once bolted down—which is exactly what you want.
Key Features
- One-piece Picatinny rail fits factory Tikka T3 scope mount holes
- Zero drilling or tapping required
- Accepts Picatinny or Weaver scope rings
- Machined from 7075 T6 extruded aluminum
- Cross-slots gauged to MIL-STD 1913 specs ±.002"
- Includes socket head Torx screws and wrench
Specifications
| Brand | EGW |
| Product | Tikka T3 0 MOA Scope Base |
| Material | 7075 T6 Aluminum |
| Rail Type | Picatinny (MIL-STD 1913) |
| MOA | 0 (Zero angle) |
| Ring Compatibility | Picatinny or Weaver rings |
| Installation | Uses factory scope mount holes |
| Recommended Torque | 20 inch-lbs |
Frequently Asked Questions
Will this fit my Tikka T3 rifle?
Yes, the EGW Tikka T3 0 MOA is designed to use the factory scope mount holes on Tikka T3 receivers with no drilling or tapping required.
What scope rings do I need?
The base accepts both Picatinny and Weaver rings, so you have flexibility in your ring choice. Make sure your rings are compatible with one of those two standards.
What's included?
The mount ships with socket head Torx screws, a wrench, and installation instructions. EGW recommends using 20 inch-lbs of torque and a drop of blue Loctite on the screws.
Can I change my eye relief and optics easily?
Yes. The Picatinny slots let you adjust eye relief by moving your rings along the rail. The 0 MOA design means you adjust windage and elevation with your scope turrets and ring position, not the base itself, giving you flexibility in which scopes you run.
