The Area 419 Zero S-Series 6.5 PRC sizing die brings precision reloading to the standard 7/8-inch form factor without the premium price tag. Built on the proven foundation of Area 419's acclaimed M-Series design, this 6.5 PRC die delivers the accuracy and reliability serious handloaders demand for match-grade rifle ammunition. Whether you're loading for long-range hunting, precision rifle competitions, or load development, the Zero S-Series gives you the engineering that keeps your ammo consistent and your bolt smooth.
What sets this sizing die apart is the attention to detail in the fundamentals. The reamer is cut to exacting dimensions for a true size—no more fighting a sticky bolt on the second or third firing. Area 419 engineered a hydraulic shoulder pressure relief system to manage case pressure during sizing, and the replaceable steel decap pins mean you're never stuck with a worn component. Full-length neck-to-extractor sizing ensures concentricity and consistency, while the precision ground expander mandrel (shipped set to .002" neck tension) lets you fine-tune tension to your exact specifications.
All Area 419 dies ship with a universal die ring, a spare decapping pin, and the installation and removal tools you need to get running. The 6.5 PRC die is compatible with common shellholders from Redding, Hornady, and RCBS, as well as Area 419's modular shellholder system. Manufactured in the USA, this die reflects Area 419's partnership with thousands of handloaders and industry professionals who know what matters when you're serious about ammunition precision.
Key Features
- Precision ground expander mandrel set to .002" neck tension, with option to add other tension increments
- Full-length neck-to-extractor sizing for concentricity and consistency
- Reamer cut to exacting dimensions for true sizing and smooth bolt operation
- Hydraulic shoulder pressure relief system
- Spring ejection for spent primers
- Replaceable steel decap pins
- Standard 7/8-inch die body
- Compatible with Redding, Hornady, RCBS, and Area 419 modular shellholders
- Includes universal die ring, spare decapping pin, and installation tools
- 100% made in the USA
Specifications
| Caliber | 6.5 PRC |
| Die Type | Full-length sizing die |
| Die Body Size | 7/8 inch |
| Included Expander Mandrel Tension | .002 inch |
| Shellholder Compatibility | Standard Redding, Hornady, RCBS shellholders; Area 419 modular system |
| Included Accessories | Universal die ring, spare decapping pin, installation/removal tools |
| Decap Pin Type | Replaceable steel |
| Country of Origin | USA |
Frequently Asked Questions
What shellholder do I need for this 6.5 PRC sizing die?
The Zero S-Series die is compatible with standard shellholders from Redding, Hornady, and RCBS that fit the 6.5 PRC cartridge. It also works with Area 419's ZERO Modular Shellholder System. Note that a shellholder is not included with the die—you'll need to source one separately or confirm you already have the correct one for your press.
Can I adjust the neck tension on this die?
Yes. The die ships with a precision ground expander mandrel set to .002 inch of neck tension. Area 419 offers additional mandrel increments available separately through their Mandrel Kit, allowing you to customize neck tension for your specific loads and brass.
What's included with the die?
Each die comes with an Area 419 ZERO Universal Die Ring, a spare decapping pin, and the necessary installation and removal tools. The shellholder is sold separately.
Is this die easy to maintain?
The replaceable steel decap pins mean you can swap out a worn pin without replacing the entire die. Area 419 includes a spare pin with your purchase, and additional pins are available separately if needed.
