Xs Sight Systems Lever Rail Ghost Ring Ws - Marlin 1894 (Dovetail Front)

The XS Sights Lever Rail Ghost Ring WS for Marlin 1894 rifles bridges the gap between classic lever-action shooting and modern optics versatility. This dovetail-mounted front sight system pairs a Picatinny-spec aluminum rail with rugged all-steel backup iron sights, letting you run a scope directly over the receiver, mount a scout scope forward, or add a red dot without removing your primary glass. It's the kind of upgrade that respects the 1894's heritage while opening up new ways to hunt and shoot.

The heart of the system is the Ghost Ring rear sight—a large-aperture design that prioritizes speed and sight picture in the field. You get two interchangeable apertures (.230" and .191" inside diameter) to dial in your preference based on lighting conditions, whether you're working timber at dawn or taking long shots in bright sun. Windage and elevation adjustments are fully user-accessible. Up front, the XS White Stripe sight replaces your factory blade and ramp with a blued steel body and high-contrast white stripe, making target acquisition quick even in variable light. The white-on-black post stands out cleanly against any background.

Installation is straightforward but intentional: the system requires removal of the factory rear sight, and all fasteners torque to 20 inch-pounds—respect that limit to avoid stripping screws. Fair warning: moving the rear sight from barrel to receiver means you'll need to re-zero after install. If you're running an octagon-barrel Marlin, this rail won't fit; it's designed for standard Marlin 1894 receivers. Alternate front sight heights are available if you need to dial in your zero.

Key Features

• Picatinny-spec aluminum rail for optic mounting in multiple positions—over receiver or forward for scout/red dot setups
• Ghost Ring rear sight with two apertures (.230" and .191") for varied lighting conditions
• Large aperture ghost ring design for fast target acquisition and wide field of view
• XS White Stripe front sight with white-on-black contrast for rapid target pickup
• Fully adjustable windage and elevation on rear sight
• All-steel construction paired with lightweight anodized aluminum rail
• Compact lever-action-compatible design—no octagon barrels

Specifications

Frequently Asked Questions

Will this rail work with my Marlin 1894 with an octagon barrel?

No. This Lever Rail is designed for standard Marlin 1894 receivers and does not fit rifles with octagon barrels.

Can I mount a scope and still use the iron sights?

Yes. The system is designed to let you run a scope over the receiver or mount a scout scope or red dot forward, while keeping the Ghost Ring and White Stripe backup sights in place for quick iron-sight backup.

What happens during installation, and will my zero stay the same?

Installation requires removal of your factory rear sight, and moving the rear sight from the barrel to the receiver will necessitate re-zeroing. Take your time with setup, and remember to torque all fasteners to exactly 20 inch-pounds—over-torquing can break screws. Alternate front sight heights are available if you need to adjust your zero point.

Which aperture should I use?

The .230" aperture is larger and better in low light; the .191" aperture is smaller and works well in bright conditions. Both are included, so you can swap them based on the day's lighting and your preference.