Wilson Stainless Neck Sizing Die Interchangeable Bushing Type 6mm/6.5 Creedmoor Bushing Sold Separately
$84.48
The L.E. Wilson stainless neck sizing die with interchangeable bushing type gives precision reloaders direct control over how much the neck of your cartridge case gets sized. Built for the 6mm and 6.5 Creedmoor, this die lets you fine-tune neck tension to match your rifle's chamber and your ammunition demands—a capability that separates careful handloaders from those stuck with one-size-fits-all dies. Unlike conventional sizing dies that use a fixed expander button, the Wilson design eliminates that step, which means better case concentricity and measurably longer brass life. That's why serious shooters and precision rifle builders reach for them.
The die sizes the neck to 3/16" from the case mouth, a proven approach that many shooters prefer for consistent neck tension without working the shoulder. You'll need an arbor press to operate it; the die includes a de-capping rod to handle spent primers. The bushings themselves are sold separately, which lets you buy only the sizes that match your exact needs and swap them as your loads evolve. L.E. Wilson manufactures a wide range of bushing sizes—more than most competitors—so you can dial in the fit for each cartridge and keep your cases running at peak performance across multiple rifles if needed.
This is purpose-built equipment for the reloader who takes neck tension seriously and wants the flexibility to adjust without buying multiple dies. If you're working up precision loads for a 6mm or 6.5 Creedmoor and you've outgrown standard sizing dies, the Wilson neck die puts control back in your hands.
Key Features
- Interchangeable bushing design lets you select and change neck sizing to your exact specifications
- Stainless steel construction for durability and corrosion resistance
- Eliminates conventional expander button, improving case concentricity
- Sizes neck to 3/16" from case mouth, a preferred depth for many precision loads
- Prolongs brass life by reducing unnecessary case work
- Includes de-capping rod for efficient primer removal
- Compatible with standard arbor press setup
- Available bushings in multiple sizes to dial in exact neck tension
Specifications
| Caliber | 6mm/6.5 Creedmoor |
| Die Type | Neck Sizing Die, Interchangeable Bushing |
| Material | Stainless Steel |
| Sizing Depth | 3/16" from case mouth |
| Bushing Type | Interchangeable (sold separately) |
| Included Accessories | De-capping rod |
| Manufacturer | L.E. Wilson |
Frequently Asked Questions
Do I need a special press to use this L.E. Wilson neck sizing die?
Yes, the die is designed for use with an arbor press. It is not compatible with standard reloading presses.
Are bushings included with this die?
No, bushings are sold separately. This lets you purchase only the specific sizes you need for your rifles and loads.
Can I use this die on multiple 6mm and 6.5 Creedmoor rifles?
Yes, by swapping to different bushing sizes, you can tune neck tension to match the chamber dimensions of different rifles, which is one of the main advantages of the interchangeable bushing design.
How does this neck die improve brass life compared to standard sizing?
By eliminating the conventional expander button and letting you size only the neck to your exact specifications, the die reduces unnecessary working of the case shoulder and body, which extends the number of times you can safely reload that brass.
