Wheeler Scope Mounting Combo Kit - Fits 1" and 30mm Scopes

A quality scope mount starts long before you tighten the first ring. The Wheeler Scope Mounting Combo Kit is a complete gunsmithing toolkit designed to handle proper installation of both 1-inch and 30mm scopes—the two most common tube diameters in modern hunting and precision shooting. Whether you're mounting a new optic on a rifle for the first time or re-bedding an existing setup, this kit gives you the professional-grade tools needed to get it right, with alignment, lapping, leveling, and torque control all in one package.

Scope rings that aren't properly aligned and lapped to your scope tube won't hold zero reliably and can damage expensive glass under recoil. The kit includes alignment bars and lapping bars for both 1-inch and 30mm tubes, plus lapping compound and a handle, so you can achieve full contact between ring and scope and distribute clamping pressure evenly. A properly leveled reticle is equally critical—crosshairs that aren't square to your bore will cause predictable windage errors, especially at distance, and will compromise the linearity of your turret adjustments. The Level-Level-Level makes quick work of getting your reticle vertical. Finally, fasteners matter: uncontrolled torque can crack rings or shift your scope, while undertightening invites creep. The kit's F.A.T. Wrench delivers precisely controlled torque, and the thread-lock compound plus ten gunsmithing screwdriver bits ensure fasteners stay put.

This is the toolkit serious shooters and gunsmiths reach for when they want to install a scope the way it should be done—not the way that's just quick enough. It covers the full mounting sequence from lapping and alignment through final torque and lock, and it works on any standard scope in the two most common tube sizes.

What's Included

• F.A.T. Wrench (torque-controlled fastening tool)
• 1-inch scope ring alignment bars
• 30mm scope ring alignment bars
• 1-inch scope ring lapping bar
• 30mm scope ring lapping bar
• Lapping bar handle
• Lapping compound
• Thread-lock compound
• 10 gunsmithing screwdriver bits

Frequently Asked Questions

What scope sizes does this kit fit?

The Wheeler Scope Mounting Combo Kit works with both 1-inch and 30mm scope tubes. Both lapping bars and alignment bars are included for each diameter.

Can I use this kit on any rifle scope?

Yes, as long as your scope has a 1-inch or 30mm tube. This kit is not scope-specific; it's designed to work universally across those two standard tube sizes.

Do I need gunsmithing experience to use this kit?

The kit is designed to make proper scope mounting accessible and repeatable. While professional gunsmiths use these tools, careful users can follow the process to align and lap their own rings. We recommend consulting gunsmithing resources or instructions if you're new to the process.

What is lapping and why does it matter?

Lapping uses a fine compound to remove high spots from scope rings, ensuring full contact between the ring and your scope tube. This distributes clamping pressure evenly, improves stability, reduces stress on the scope, and helps maintain zero under recoil.