Warne Maxima Quick Detach 1" Rings - Medium, Matte Finish, for CZ550 (19mm Dovetail)

If you run a CZ550 and want a scope that stays zeroed every time you mount it, Warne Maxima Quick Detach 1" rings built for CZ's 19mm dovetail are a game-changer. These medium-height rings mount directly to your receiver without needing an intermediate base—no gunsmithing, no adapters, just solid mechanical fit designed to the tolerances CZ actually uses. The standout feature is Warne's indexable lever system: detach your optic between shots or seasons, then reattach it and your zero comes right back. No re-zeroing, no guessing.

The lever isn't stuck in one spot either. Once the rings are clamped to the dovetail, you can position the quick-detach lever wherever makes sense for your setup—forward of the scope, to the side, wherever your hand naturally reaches. Flip the lever out, rotate it to your chosen position, and it snaps into place. It's the kind of detail that separates a good mount from one that actually works the way you want it to. The matte finish is durable and won't glint in field conditions.

Inside, Warne engineered a CZ-specific recoil pin that grips the dovetail positively, keeping the rings locked in place under recoil. The scope tube itself clamps down with four Torx T-15 socket cap screws—tighten to 25 inch-pounds and you're done. If you're building a CZ550 hunting rifle, this is the straightforward, reliable mounting solution that lets you focus on the shot instead of fussing with optics.

Key Features

• Direct-mount to CZ 19mm dovetail—no base required
• Indexable quick-detach lever positions anywhere around the ring
• Return to zero guaranteed with each remount
• CZ-specific recoil pin for secure dovetail engagement
• Four Torx T-15 socket cap screws (25 in/lb torque recommended)
• Matte finish resists glint and corrosion

Specifications

Frequently Asked Questions

Will these rings fit my CZ550?

Yes, these rings are engineered specifically for CZ550 receivers with a 19mm dovetail. They mount directly to the dovetail with no base plate required. The CZ-specific recoil pin ensures a secure fit.

Can I remove my scope and remount it without losing zero?

Yes. The Warne indexable quick-detach lever system is designed to return to zero every time you reattach the scope. Once the rings are clamped to the dovetail, you can position the lever anywhere, and each time you detach and reattach, your zero is preserved.

What's included and what torque should I use?

The rings come with four Torx T-15 socket cap screws for clamping the scope tube. Warne recommends torquing these fasteners to 25 inch-pounds.

Can I adjust where the quick-detach lever sits on the rings?

Yes. The indexable lever allows you to position it anywhere around the ring. After the rings are secured to the dovetail, simply pull out the lever, rotate it to your desired location, and it will snap into place.