Warne Maxima 1" Fixed Rings - Medium, Matte Finish, CZ527 16mm Dovetail

The Warne Maxima 1" Fixed Rings in Medium for CZ527 16mm dovetail mounting offer a direct, no-fuss way to attach a rifle scope to your CZ 527 receiver. Unlike universal rings that require a separate base, these CZ-specific fixed rings machine directly onto your rifle's dovetail, eliminating extra components and potential alignment headaches. They're built to tight tolerances so they fit right where they belong—no adapters, no guesswork.

If you're running a CZ 527 and want a solid, permanent optics platform, these rings deliver. The matte finish keeps glare down and blends with most rifle finishes. Each ring uses four T-15 Torx socket cap screws for a secure clamp that won't shift under recoil, and a CZ-specific recoil pin ensures positive engagement with your receiver's dovetail geometry. Once torqued to spec and left alone, they stay put.

Warne has built a reputation for dependable scope rings and mounts across dozens of rifle platforms, and these CZ rings follow that tradition. They're the kind of accessory that works without drama—you mount your scope, dial it in, and forget about the rings themselves. That's exactly what you want from a scope mounting system.

Key Features

• Direct CZ527 16mm dovetail fit—no mounting base required
• Four T-15 Torx socket cap screws for secure, repeatable clamping
• CZ-specific recoil pin for positive dovetail engagement
• Fixed ring design—scope height and position are locked in
• Matte finish resists glare and corrosion

Specifications

Frequently Asked Questions

Will these rings fit my CZ rifle?

Yes—these are sized for the CZ527 with its 16mm dovetail. They won't fit CZ 550 receivers, which use a 19mm dovetail. Verify your rifle's model before ordering.

Do I need a separate base to mount these rings?

No. These rings mount directly to your CZ527's receiver dovetail without a base. That's one fewer component and one fewer potential point of failure.

What scope diameter do these rings accept?

These are 1-inch rings, so they fit standard 1-inch diameter scopes.

How tight should I torque the screws?

Use 25 in/lb of torque on the T-15 Torx socket cap screws. This clamps the scope securely without over-tightening and damaging the optic tube.