Warne 34Mm High (.525'') Qd Rings Black

The Warne 34mm High QD Rings (.525" height) in black are quick-detach scope rings built for shooters who demand a repeatable, zero-holding mounting system without the hassle of removing and reinstalling their optics every time they switch between rifles or pack up in the field. These rings use Warne's indexable lever design—pull the lever out, rotate it to your preferred position, and let it snap into place. The combination of sintered steel construction (which preserves the strength of steel while adding the ductility necessary for consistent grip) and a square stainless steel recoil control key means your scope stays put, even under serious recoil and whether you're shooting a bolt gun, AR platform, or lever action.

Built for compatibility, these 34mm rings work with Warne Maxima bases as well as all Weaver cross-slot and Mil-Spec Picatinny rails—the industry standard for modern rifle mounts. The recoil key engages the full width and depth of the base's recoil slot, preventing shift or movement and protecting against peening when mounted on aluminum. When paired with Warne steel bases, the system delivers accuracy to within 1/1000th of an inch when removing and reattaching the optics, so your zero survives field use and switching between shooting platforms.

The high profile (.525") is the go-to choice for hunters running larger objective lenses or who need extra clearance over higher-profile rifles and rails. The matte black DuPont powder coat finish is durable and non-reflective, while the rings assemble with quality Torx T-15 socket cap screws for solid, consistent preload.

Key Features

• Indexable QD lever system allows repositioning after installation without disturbing zero
• Repeatable return to zero when removing and reattaching optics
• Square stainless steel recoil control key engages full base slot depth for secure hold under recoil
• Sintered steel construction balances strength with necessary ductility for grip contact
• Compatible with Warne Maxima bases, Weaver, and Mil-Spec Picatinny rails
• Matte black powder coat finish
• Assembled with Torx T-15 socket cap screws

Specifications

Frequently Asked Questions

Will these rings fit my Picatinny rail or Weaver base?

Yes. The Warne 34mm High QD Rings are designed to work with Warne Maxima bases, all Weaver cross-slot bases, and Mil-Spec Picatinny rails.

Can I remove my scope and remount it without losing zero?

Yes. The indexable lever system and square recoil key design are engineered for repeatable return to zero. When used with Warne steel bases, Warne guarantees accuracy to within 1/1000th of an inch when removing and reattaching optics.

What does the .525" height mean, and when would I need high rings?

The .525" measurement is the distance from the top of the base to the centerline of the bore when the rings are mounted. High rings are typically used with larger objective lenses (typically 50mm and above) to clear the objective bell, or when mounted on rifles and rails with a higher profile where standard rings would cause contact or shadowing.

How do I position the QD lever after the rings are installed?

Once the rings are attached to the base, you can reposition the lever to wherever you prefer. Simply pull out on the lever, rotate it to your desired location, and let it snap back into place. This indexing feature allows you to orient the lever for ergonomics or to keep it clear of your charging handle or other controls.