VISM SPD Dual Power Solar Red Dot Sight with Quick Detach Picatinny Mount

SKU:
114464415
|
UPC:
848754007766
|
MPN:
VDBSOL130
$108.99
$120.99
(You save $12.00 )
Current Stock:
Finish-Color:
Black
Objective:
30mm
Min Magnification:
1x
Max Magnification:
1x
Dot Size:
2 MOA
Reticle:
2 MOA Red Dot Illuminated
Adjustment Size:
0.50 MOA
Optic Coating:
Ruby
Eye Relief:
Unlimited
Battery Size:
AA
Weight:
11.70 oz
Windage Elevation:
Adjustable

The NCStar VISM SPD Dual Power Solar Red Dot Sight brings flexibility to any shooter who wants to run optics without worrying about battery life. This 1x red dot sight uses dual power sources—a solar cell on top that harnesses sunlight automatically, plus an AA battery for low-light and indoor use—so you're covered whether you're hunting in bright daylight or shooting at the range after work. The quick detach Picatinny mount locks down securely and removes fast, making it ideal for AR-15s and other platforms where you want to swap optics between guns or stow your rifle without the sight getting in the way.

The 2 MOA red dot is bright and easy to pick up, with five adjustable brightness levels when running on battery power. The sight sits at a standard 1.5" height above your AR rail, so it co-witnesses well with standard height iron sights. Unlimited eye relief means you can shoot from any position or shoulder angle without losing the dot—no tunnel vision, no hunting for the sight picture. The ruby lens coating reduces glare and helps the reticle pop even in harsh light. The LED is completely safe for your eyes and won't cause strain during extended shooting sessions.

If you're the type who prefers not to depend on batteries for every range trip or hunting season, the solar cell takes that variable off the table on sunny days. When clouds roll in or you're indoors, flip the electronic control panel to battery mode and adjust brightness to your preference. The red LED indicator shows you when the battery is powering the sight. This is a no-frills, reliable setup for hunters and shooters who value simplicity and redundancy in their optics.

Key Features

  • Dual power source: solar cell automatically activates in sunlight; AA battery powers the sight indoors, at night, or on cloudy days
  • 2 MOA red dot with 5 brightness levels for battery-powered operation
  • Unlimited eye relief—shoot from any position without losing the sight picture
  • Quick detach Picatinny mount locks securely and removes instantly
  • 1.5" AR-15 height for co-witness with standard iron sights
  • Ruby lens coating to reduce glare and enhance visibility
  • LED reticle safe for extended use with no eye strain
  • Electronic control panel with battery indicator light

Specifications

Magnification1x
Dot Size2 MOA
Dot ColorRed
Objective Diameter30mm
Mount TypeQuick Detach Picatinny (Locking)
Sight Height1.5" (AR-15 height)
Length4.0"
Weight11.7 oz
Lens CoatingRuby
Battery TypeAA
Eye ReliefUnlimited
Brightness Levels5 (battery powered)

Frequently Asked Questions

Will this red dot work on my AR-15?

Yes. The VISM SPD mounts to any Picatinny rail via its quick detach locking mount and sits at 1.5" height, which is the standard sight-over-bore height for AR-15s. It will co-witness with standard iron sights.

Can I use this sight indoors or at night?

Absolutely. The solar cell only activates in sufficient sunlight, so indoors or at night you switch to AA battery power using the electronic control panel. You can adjust brightness across 5 levels depending on lighting conditions.

How does the dual power system work?

The sight automatically powers on via the solar cell whenever there is enough sunlight on the top-mounted solar panel. If you're indoors, shooting at dusk, or conditions are too dim, use the AA battery instead. You control battery power through the electronic control panel, which includes a red LED indicator to show when battery power is active.

What's included with this sight?

The sight comes with the quick detach Picatinny mount. Note that international orders do not include the AA battery, so you may need to source one separately depending on your location.