Tenpoint Acu-X Lighted Rd Carbon Arrows 20

The TenPoint Acu-X Lighted RD carbon arrows are purpose-built for TenPoint's rail-less reverse-draw crossbows, combining precision engineering with shot-tracking convenience. These 20-inch arrows integrate a lighted snap-on nock that activates automatically when you fire—the bowstring fully engages the nock and powers the LED, giving you superior flight visibility out to extended range. The light stays active for roughly 24 hours of use, and you can deactivate it anytime by pulling the nock straight out with your fingers or a perfect puller (sold separately).

Built on a high-performance carbon shaft, each Acu-X RD arrow is manufactured using TenPoint's precision spine-indexing process, which aligns the arrow spine in the exact configuration proven to perform best with rail-less reverse-draw platforms. This consistency—combined with strict quality control (each arrow checked to .001" straightness and grain-matched within 1 grain per arrow)—delivers the accuracy and repeatability you need for hunting or target shooting at distance. The 16.5% front-of-center balance and industry-standard 2 Blazer vanes further enhance stability and shot-to-shot grouping.

The innovative snap-on nock design delivers an unmistakable audible click when it locks onto your bowstring, eliminating lateral nock travel during the shot cycle. This secure, repeatable engagement preserves your bowstring's serving life while maximizing precision. Each arrow ships with a 100-grain field point included, and the package arrives grain-matched and factory-inspected, ready to shoot.

Key Features

• Lighted snap-on nock activates on release and deactivates on-demand for easy tracking
• LED light rated for approximately 24 hours of continuous use
• Precision spine-indexing optimized specifically for TenPoint rail-less reverse-draw crossbows
• High-performance carbon shaft with .001" straightness tolerance
• 2 Blazer vanes for exceptional consistency at extended ranges
• 16.5% front-of-center balance for improved flight stability
• Grain-matched within 1 grain per arrow for shot-to-shot consistency
• Audible snap-on nock click confirms proper bowstring engagement
• 100-grain field point included

Specifications

Frequently Asked Questions

Are these arrows compatible with all crossbows?

No. The Acu-X Lighted RD arrows are designed exclusively for TenPoint rail-less reverse-draw crossbows. They use a precision spine-indexing process specific to those platforms and the snap-on nock is engineered for that bowstring engagement system.

How do I turn the LED light on and off?

The light activates automatically when you fire—the bowstring pushes the nock fully into the bushing and powers the LED. To deactivate it, simply grip the nock and pull it straight out with your fingers or a Bednar Perfect Puller (sold separately) until the light turns off. You can reactivate it anytime by reinserting the nock.

What's included in the package?

Each 36-pack of Acu-X Lighted RD arrows comes with a 100-grain field point on each arrow. The nock itself is the Acu-X Snap-On Lighted model with an integrated LED.

How long does the LED light last?

The LED light is rated for approximately 24 hours of active use. Since you activate and deactivate the light as needed, the actual lifespan depends on how much you use it during your shooting sessions.