Slip 2000 725 Foaming Bore Cleaner - 12 Oz.

Slip 2000 725 Foaming Bore Cleaner is a water-based solvent designed to make rifle and firearm bore cleaning faster and more effective. Unlike traditional liquid cleaners that require patches and elbow grease, this pressurized 12 oz formula foams on contact with the bore, allowing it to break down powder residue and carbon buildup without constant scrubbing. Whether you're cleaning after a long range session or maintaining a rifle you haven't shot in months, the foaming action penetrates and lifts fouling that settles in hard-to-reach areas of the bore.

The application process is straightforward: spray the foam into your bore through the breech, let it work for about 15 minutes, then push the cleaner out with a patch, mop, or simply rinse it away. This hands-off dwell time means less time spent hunched over a cleaning rod and more time getting back to shooting or field work. The water-based formula is also safer to handle than harsher petroleum solvents, making it a practical choice for regular maintenance at home, in the truck, or at the range.

After cleaning, follow up with a Slip 2000 lubricant to protect all metal surfaces from rust and corrosion. A properly cleaned and lubricated bore is the foundation of consistent accuracy and reliable gun performance, and this foaming cleaner makes that job less tedious.

Key Features

• Foaming action breaks down powder residue and carbon buildup
• Water-based formula for safer handling
• Pressurized 12 oz can for easy application through the breech
• Requires minimal scrubbing—spray, wait 15 minutes, and rinse or patch out
• Effective on rifles, handguns, and other firearms

Specifications

Frequently Asked Questions

How long should I let the foaming cleaner sit in the bore?

About 15 minutes. This dwell time allows the foam to break down powder residue and carbon buildup before you push it out or rinse it away.

Can I use this on all firearms?

Yes. This foaming bore cleaner is designed for rifles, handguns, and other firearms with bores you can access through the breech.

Do I need to use a special lubricant after cleaning?

While not required, Slip 2000 recommends re-treating all metal parts with a Slip 2000 lubricant after cleaning to prevent rust and corrosion.

Is this water-based cleaner safe to use indoors?

The water-based formula is safer to handle than petroleum-based solvents, though as with any solvent, proper ventilation is always recommended during cleaning.