Redding Type S Match Bushing Neck Die Set 6Mm Dasher
$315.74
The Redding Type S Match Bushing Neck Die Set for 6mm Dasher is purpose-built for reloaders who demand repeatable neck tension and runout control. This bushing-style neck sizing die gives you straightforward, precise command over case neck dimensions—critical for match-grade handloads and competitive shooting where consistency wins. The Type S system uses interchangeable sizing bushings in .001-inch increments, so you can fine-tune neck fit to your brass and ammunition requirements without buying entirely new dies.
What sets the Type S apart is its engineering for concentricity. The bushing self-centers on the case neck as it resizes, reducing runout and improving case-to-chamber fit. The adjustable decapping rod lets you resize only the neck length you need if you're running commercial brass or have sorted and turned your cases for uniformity. The set ships with a standard decapping button, but you also get a decapping pin retainer—meaning you can neck size without the button if you prefer to skip the depriming step on prepared brass.
This isn't a one-trick die set. It comes complete with a Type S Bushing Neck Sizing Die Body and a Competition Seating Die, so you have everything needed to size and seat rounds for precision rifle work. Whether you're working up 6mm Dasher loads for PRS competition, long-range hunting, or just chasing tighter groups at the range, the Type S system gives you the control and repeatability that separates handloading from match-grade handloading.
Key Features
- Interchangeable sizing bushings in .001-inch increments for precise neck tension control
- Bushing self-centers on case neck to enhance concentricity and reduce runout
- Adjustable decapping rod allows selective neck sizing—useful for commercial brass or neck-turned cases
- Decapping button and decapping pin retainer included for flexible operation
- Competition Seating Die included for complete sizing and loading in one set
- Designed for 6mm Dasher chambering
Specifications
| Product Type | Neck Sizing Die Set |
| Chambering | 6mm Dasher |
| Die Style | Type S Bushing |
| Bushing Increments | .001 inch |
| Included Components | Type S Bushing Neck Sizing Die Body, Competition Seating Die, decapping button, decapping pin retainer |
Frequently Asked Questions
What's included in the Redding Type S Match Bushing Neck Die Set for 6mm Dasher?
The set contains a Type S Bushing Neck Sizing Die Body, a Competition Seating Die, a standard decapping button, and a decapping pin retainer. This gives you everything needed to neck size and seat ammunition in one package.
Can I use this die set with commercial brass?
Yes. The adjustable decapping rod allows you to resize only a portion of the neck length if desired, which is especially useful when working with commercial brass as-is. You also have the option to use or skip the decapping button depending on your workflow.
What are the bushing increments, and why does that matter?
The Type S system uses interchangeable sizing bushings available in .001-inch increments. This precision lets you dial in neck tension to match your specific brass and chamber, which is essential for consistency in match-grade or precision rifle loads.
How does the Type S bushing improve concentricity?
The bushing self-centers on the case neck during the sizing process, which enhances concentricity and helps reduce runout. Better runout means better precision and reliability when you send rounds downrange.
