Redding Type S Elite Die Set .338 Lapua Mag

The Redding Type S Elite Die Set for .338 Lapua Mag is purpose-built for handloaders who demand precision and control on the bench. This three-die set combines Redding's proven Type S bushing technology with a competition-grade seating die—the result of direct feedback from shooters pushing the limits of long-range rifle cartridges. Whether you're working up loads for a custom rifle, competing at distance, or hunting with a magnum, this set gives you the consistency and accuracy that separate handloaded ammunition from factory rounds.

The Type S Bushing Full Sizing Die and Type S Bushing Neck Sizing Die are the heart of the system. Each uses interchangeable bushings to control neck diameter and tension in 0.001" increments, letting you dial in exactly the neck tension your rifle demands without overworking brass. The bushings are hardened steel and available with TIN (Titanium Nitride) coating for reduced friction and easier loading cycles. Because they float freely to self-center on the case neck, you get repeatable, precise sizing geometry shot after shot.

The included Redding Competition Seating Die handles the final step with the same attention to detail. Combined with the bushing neck sizing, this die set delivers the kind of round-to-round uniformity that shows up downrange—tighter groups, more reliable velocity, and better ballistic coefficients when every round is built to spec.

This is reloading equipment built for handloaders who understand that precision in the loading room translates to confidence in the field or on the range.

Key Features

• Type S Bushing Full Sizing Die with 0.001" incremental neck tension control
• Type S Bushing Neck Sizing Die for independent neck control without full-length sizing
• Redding Competition Seating Die for consistent bullet seating depth
• Free-floating bushings self-center on case neck for repeatable accuracy
• Hardened steel bushings; TIN-coated versions available for reduced friction
• Interchangeable bushing system allows fine-tuning of neck tension without die changes

Specifications

Frequently Asked Questions

What's included in the .338 Lapua Mag Type S Elite die set?

The set includes three dies: a Type S Bushing Full Sizing Die, a Type S Bushing Neck Sizing Die, and a Redding Competition Seating Die. You'll need to purchase bushings separately if not already owned.

Can I use different neck tension settings without buying new dies?

Yes. The interchangeable bushing system lets you swap bushings in 0.001" increments to adjust neck tension and diameter without changing dies. This gives you the flexibility to tune for different brass or rifle requirements.

Are the bushings coated or plain steel?

Redding supplies hardened steel bushings as standard. TIN (Titanium Nitride) coated bushings are available separately for improved lubricity and easier loading cycles if you prefer them.

Is this die set suitable for long-range or competition reloading?

Yes. The Type S Elite set is designed with the precision and control needed for long-range hunting and competition shooting. The competition-grade seating die and fine-increment bushing system support the consistency required for distant targets.