Redding Series A Full Length Die Set for Bottleneck Cases .30-30 Win

The Redding Series A Full Length Die Set for Bottleneck Cases in .30-30 Win gives you a complete two-die setup built to tight tolerances for consistent, reliable handloading. Whether you're working up loads for your lever-action or single-shot, this die set delivers the precision Redding is known for—each die machined on Hardinge Super-Precision lathes and heat-treated in controlled furnaces to hold SAAMI chamber specifications across any standard action type. You get the full length resizing die with decapping rod assembly and neck expander button, plus a seating die with built-in bullet guide and crimp ring, so you're ready to start loading right out of the box.

Redding's Series A dies are hand-polished and ultrasonically cleaned before final inspection, meaning smooth operation and a product built to last. The die box itself doubles as a cartridge loading block and handy storage solution—you'll even find a spare decapping pin, hex wrench, and a slot for your shellholder inside. Because both dies use the industry-standard 7/8-14 thread, they'll drop right into any compatible press you're already running.

If you're loading .30-30 ammunition and want dies you can trust to perform shot after shot, the Redding Series A set removes guesswork and delivers the repeatability serious reloaders demand. Built from the finest alloy steels and machined to the tightest tolerances in the industry, these dies are an investment that'll serve you reliably for decades.

Key Features

• Full length resizing die with decapping rod assembly and neck expander button
• Seating die with integrated bullet guide and crimp ring
• Machined on Hardinge Super-Precision lathes for tight, consistent tolerances
• Heat-treated in atmospherically controlled furnaces for durability and longevity
• Hand-polished and ultrasonically cleaned for smooth, flawless operation
• Guarantees proper fit in any standard SAAMI .30-30 chamber
• Includes storage die box, spare decapping pin, hex wrench, and shellholder slot
• Industry-standard 7/8-14 threaded bodies for universal press compatibility

Specifications

Frequently Asked Questions

Will this Redding die set work with my press?

Yes, as long as your press accepts standard 7/8-14 threaded dies. This is the industry-standard thread size used by virtually all modern single-stage and progressive reloading presses.

What's included in the box?

You get both the full length resizing and seating dies, a storage/loading block die box, a spare decapping pin, a hex wrench, and a dedicated slot inside the box to keep your shellholder organized and accessible.

Can I use these dies in any .30-30 chamber?

Yes. Redding guarantees that these dies will produce ammunition that properly fits any standard SAAMI .30-30 chamber, regardless of whether you're loading for a lever-action, single-shot, or other action type.

Do I need anything else to start loading .30-30?

This set provides the dies themselves. You'll also need a compatible press, shellholder, decapping pin, calipers or micrometer, scales, powder, primers, brass, and bullets—but the die set is the core component for sizing and seating your rounds.