Redding 73 Style Steel Bushing/.267

The Redding 73 Style Steel Bushing in .267" diameter is a precision neck-sizing component for hand loaders who demand tight, consistent case neck control. If you're working with bottleneck cartridges and running a Redding Type S or similar bushing-style neck-sizing die, this hardened steel bushing handles the critical job of controlling bullet fit and runout without oversizing your cases. The .267" size is one of dozens available in .001" increments across Redding's lineup, so you can dial in the exact neck diameter your specific caliber and bullet combination needs.

These bushings are heat-treated to Rc 60-62 surface hardness and hand-polished during manufacturing—that hardness matters because it reduces the effort needed to size cases while maintaining dimensional stability through hundreds of reloading cycles. A harder, smoother bushing means less friction, less wear on your press, and more predictable sizing results. Whether you're loading for match competition or hunting, consistent neck tension translates to tighter groups and more reliable bullet seating.

Redding bushings are designed to work in 73-style die bodies and are the workhorse choice for serious reloaders who understand that case preparation is half the battle. If you're already running a Redding full-length sizer or neck-sizing die, picking up the right bushing size takes minutes and transforms your setup for the specific cartridge or bullet you're working with that day.

Key Features

• Heat-treated steel construction (Rc 60-62 surface hardness) for durability and reduced sizing effort
• Hand-polished sizing diameter for smooth, consistent neck control
• Fits Redding 73-style neck-sizing die bodies
• Part of a .001" increment sizing system spanning .185" to .368" diameter

Specifications

Frequently Asked Questions

Will this bushing work in my Redding neck-sizing die?

Yes, if you have a Redding 73-style neck-sizing die body. The bushing slides into the die and sizes the case neck to the diameter stamped on it (.267" in this case). Check your die documentation or contact Redding to confirm your die uses the 73-style bushing system.

What's the difference between .267" and other bushing sizes?

The .267" diameter is one option in Redding's range of bushings, which go from .185" to .368" in .001" increments. You choose the size that matches the neck diameter you need for your cartridge and bullet combination. Smaller or larger bushings will give you different neck tension.

Why is hand-polishing and heat-treating important in a bushing?

The polished surface reduces friction and sizing effort, so your press doesn't have to work as hard. The Rc 60-62 hardness keeps the bushing from deforming over time, which maintains the exact sizing diameter you need through hundreds of reload cycles.