Redding 6Mm Gt Bushing Full Length Die Set
$255.68
$259.99
(You save
$4.31
)
The Redding 6mm GT Bushing Full Length Die Set gives you the precision control serious reloaders need for consistent, accurate ammunition. This two-die set pairs a Type S Bushing Full Sizing Die with a Competition Bullet Seating Die, making it a complete solution for handloading 6mm GT cartridges. Whether you're preparing match ammunition or building hunting loads that shoot tight groups, the interchangeable bushing system and micrometer-adjusted seating die let you dial in exactly the neck tension and bullet concentricity your rifle demands.
The Type S Bushing Full Sizing Die handles full-length resizing while giving you precise control over case neck dimensions—a critical step for consistent feeding and chamber fit. The real advantage here is the interchangeable bushings: you're not locked into a single neck size. You can experiment and dial in the exact bushing diameter that works best with your brass and your rifle, then swap them as needed when you change lots or adjust your load strategy.
The Competition Bullet Seating Die is built around a micrometer that clicks in .001-inch increments, so you can seat bullets to the exact depth your load requires and repeat it shot after shot. The floating seating stem minimizes runout by letting the die itself find the best alignment with your case, rather than forcing rigid concentricity. That attention to detail is what separates handloads that perform from handloads that just get close.
If you're already invested in 6mm GT reloading or planning to be, this set removes guesswork and gives you the platform to produce match-grade ammunition at your own bench.
Key Features
- Type S Bushing Full Sizing Die with interchangeable bushings for custom neck tension control
- Competition Bullet Seating Die with micrometer adjustment in .001-inch increments
- Floating seating stem to reduce bullet runout and concentricity issues
- Complete two-die set for full-length resizing and bullet seating
- Designed specifically for 6mm GT cartridge
Specifications
| Brand | Redding |
| Product Type | Bushing Full Length Die Set |
| Caliber | 6mm GT |
| Dies Included | Type S Bushing Full Sizing Die, Competition Bullet Seating Die |
| Seating Micrometer Increment | .001 inch |
Frequently Asked Questions
What's included in the Redding 6mm GT die set?
The set contains two dies: a Type S Bushing Full Sizing Die and a Competition Bullet Seating Die. Interchangeable bushings are available separately to customize neck sizing.
Can I use this die set to reload factory 6mm GT brass?
Yes. The Type S Bushing Full Sizing Die performs full-length resizing, which is appropriate for most factory and previously-fired brass.
How precise is the seating die micrometer?
The Competition Bullet Seating Die micrometer is calibrated in .001-inch increments, allowing fine adjustments to bullet seating depth.
What does the floating seating stem do?
The floating seating stem system reduces bullet runout and concentricity problems by allowing the die to align naturally with your case rather than forcing a rigid connection.
