Redding 280 Remington Bushing Neck Die Set

The Redding 280 Remington Bushing Neck Die Set is a competition-grade reloading die system built for shooters who demand precise neck sizing and bullet seating. If you're handloading for your 280 Remington and want repeatable, tight tolerances—whether you're chasing accuracy at the range or preparing ammunition for hunting—this three-piece set gives you the control that separate bushing neck sizing delivers. Redding's competition dies are engineered around a philosophy of support and alignment: from the moment your case enters the die until the bullet seats, every component works to minimize runout and maximize consistency.

The Competition Bushing Neck Sizing Die is the heart of this set. Your case is fully supported and aligned before sizing begins, then held firmly in a sliding sleeve as it moves upward into the sizing bushing. The bushing self-centers on the case neck, and the decapping rod stays in precise alignment using the die's internal structure as a linear guide—much like a firing pin. A micrometer adjustment lets you dial in exactly how much neck length gets sized, giving you fine control over neck tension. The Body Die handles full-length resizing of the case body and bumps the shoulder for proper chambering without touching the neck you just finished sizing. Finally, the Competition Bullet Seater uses a floating seating stem with manufacturing tolerances tight enough that the stem literally floats within its guide—this precision fit is what lets you achieve the bullet-to-case concentricity serious reloaders are after. Both the neck die and seater feature micrometer adjustments for repeatable depth control.

Bushings and shellholder are sold separately, so you'll need to source those to complete your setup. If you're stepping up from standard dies or building a dedicated 280 Remington loading bench, this set rewards attention to detail with ammunition that shoots like it's supposed to.

Key Features

• Complete case support and alignment during neck sizing process
• Self-centering bushing reduces case runout
• Micrometer adjustments on both Neck Die and Bullet Seater for precise, repeatable depth control
• Floating seating stem with precision fit for consistent bullet concentricity
• Body Die resizes case without disturbing sized neck
• Internal die structure provides decapping rod alignment comparable to firing pin support

Specifications

Frequently Asked Questions

What comes in the Redding 280 Remington Bushing Neck Die Set?

The set includes three dies: a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Bullet Seater. Bushings and the shellholder are not included and must be purchased separately.

Do I need to buy bushings separately?

Yes, bushings are sold separately. You'll also need a shellholder to complete your reloading setup with this die set.

What makes bushing neck sizing different from standard sizing?

Bushing neck sizing supports your entire case during the sizing stroke and allows the bushing to self-center on the case neck. The micrometer adjustment gives you precise control over how much neck length is sized, letting you fine-tune neck tension for your specific loads and firearm.

Is this die set suitable for long-range or hunting ammo?

Yes. The competition-grade precision and micrometer adjustments on the neck die and seater make this set well-suited for both precision rifle shooting and hunting applications where consistent, accurate ammunition is important.