Redding 270 Winchester Bushing Die Set
$266.88
$276.99
(You save
$10.11
)
The Redding 270 Winchester Bushing Die Set is a three-die reloading solution built for handloaders who demand tight tolerances and repeatable accuracy. This set pairs Redding's Type S bushing dies with a competition seating die, giving you the precision tools needed to produce match-quality ammunition in 270 Winchester. Whether you're a competitive shooter or a serious hunter, the interchangeable bushing system lets you dial in neck tension to the thousandth of an inch—no guesswork, no over-working your brass.
The Type S bushing full sizing die and neck sizing die both use hardened steel bushings that float freely to self-center on the case neck. This design means you get consistent neck diameter control without the neck-working issues that plague fixed-opening dies. Redding offers bushings in standard hardened steel or with a TIN (Titanium Nitride) coating for reduced friction and smoother operation. Since bushings are interchangeable and available in 0.001" increments, you can fine-tune neck tension for your specific brass and bullet combination—critical when you're chasing precision at distance or on the range.
The third component, Redding's Competition Seating Die, handles bullet seating with the same precision mindset. Together, these three dies form a complete 270 Winchester reloading system that rewards attention to detail with improved shot-to-shot consistency. If you're already invested in quality brass and components, a precision die set like this one pays dividends in tighter groups and more predictable ballistics.
Key Features
- Type S Bushing Full Sizing Die for controlled, uniform case sizing
- Type S Bushing Neck Sizing Die with free-floating bushing design
- Competition Seating Die for precise bullet seating
- Interchangeable bushings available in 0.001" increments
- Hardened steel bushings or TIN-coated options for reduced friction
- Self-centering bushing system minimizes brass work-hardening
Specifications
| Caliber | 270 Winchester |
| Die Type | Type S Bushing (Full Sizing & Neck Sizing) + Competition Seating |
| Bushing Material Options | Hardened Steel or TIN Coating |
| Bushing Increments | 0.001" |
| Number of Dies | 3 |
Frequently Asked Questions
What's included in the Redding 270 Winchester Bushing Die Set?
This set includes three dies: a Type S Bushing Full Sizing Die, a Type S Bushing Neck Sizing Die, and a Redding Competition Seating Die. Bushings are sold separately and are available in standard hardened steel or TIN-coated versions.
Can I adjust neck tension with this die set?
Yes. The Type S bushing system uses interchangeable bushings that control neck diameter and tension in 0.001" increments. This lets you dial in the exact neck tension for your brass and bullet combination without changing dies.
Why use a bushing die instead of a standard sizing die?
Bushing dies give you precise, repeatable control over neck diameter and tension while reducing unnecessary brass work-hardening. The free-floating bushing design self-centers on the case neck, improving sizing consistency and final round accuracy compared to fixed-opening dies.
Should I choose hardened steel or TIN-coated bushings?
Both work well. TIN-coated bushings offer reduced friction and smoother operation, which some handloaders prefer for high-volume reloading. Standard hardened steel bushings are durable and cost-effective. The choice depends on your reloading volume and preference.
