Redding #20 Vld Bullet Seating Micrometer
$47.21
$47.99
(You save
$0.78
)
The Redding #20 VLD Bullet Seating Micrometer transforms your conventional seating die into a precision reloading tool built for shooters chasing accuracy at the highest level. VLD (Very Low Drag) bullets demand meticulous seating depth control, and this micrometer attachment delivers repeatability to within 1/1000th of an inch—the kind of consistency that separates competitive loads from merely good ones. If you're already running a Redding seating die with a ½-20 threaded seat plug, this micrometer converts it without replacing the entire die.
Competition handloaders know that even tiny variations in bullet seating depth can shift your velocity and point of impact. This tool removes guesswork by locking in exact depths you can dial in and reproduce shot after shot. Simply match the number on your current seating plug to the corresponding micrometer number, swap it in, and you're ready to work. It's the kind of upgrade that pays dividends in group consistency, especially when you're load-testing or pushing precision rifle demands.
Built for handloaders serious enough to measure in thousandths and disciplined enough to chase incremental accuracy gains. If your reloading bench is already stocked with quality Redding equipment, this micrometer is a straightforward way to elevate your seating precision without overhauling your setup.
Key Features
- Precision seating depth control to within 1/1000th of an inch
- Designed for VLD (Very Low Drag) bullet applications
- Converts existing Redding seating dies with ½-20 threaded seat plugs
- Easy interchange between dies—match micrometer number to seating plug number
- Enables repeatable, competition-grade bullet seating
Specifications
| Product Name | Redding #20 VLD Bullet Seating Micrometer |
| Brand | Redding |
| Category | Reloading Equipment—Measuring Tools |
| Compatibility | Seating dies with ½-20 threaded seat plugs |
| Precision | 1/1000th of an inch |
| Bullet Type | VLD (Very Low Drag) |
Frequently Asked Questions
Will this micrometer work with my current Redding seating die?
Yes, if your seating die uses a seat plug with ½-20 threads. Match the number on your existing seating plug to the corresponding micrometer number (#20 in this case) to ensure proper fit. Redding provides a reference chart to help with this.
How precise is the seating depth measurement?
This micrometer allows you to set and repeat bullet seating depths to within 1/1000th of an inch, delivering the consistency required for competitive accuracy.
Can I use this with different seating dies?
Yes. The micrometer easily transfers between dies as long as they use ½-20 threaded seat plugs and the micrometer number matches the seating plug number on each die.
Is this tool designed for a specific bullet type?
This micrometer is specifically designed for VLD (Very Low Drag) bullets, which benefit from precise seating depth control for optimal ballistic performance.
