Rcbs Semi-Point Rifle Bullet Mould - Double Cavity .244" 95 Gr

The RCBS Semi-Point Rifle Bullet Mould in .244" diameter with 95-grain weight is a workhorse tool for handloaders who cast their own projectiles. Built from solid cast iron, this double-cavity mould lets you produce two bullets per cycle, cutting your casting time in half compared to single-cavity alternatives. If you're serious about reloading—whether you're feeding a precision rifle, reducing ammunition costs, or experimenting with custom loads—a quality casting mould is foundational to the process.

RCBS has engineered this mould with precision-ground blocks that meet tight tolerances, which translates to consistent bullet dimensions and cleaner castings with minimal gate work. The mould comes equipped with a 3/16-inch sprue plate made from solid steel, secured firmly in place by tempered spring washers and screws so nothing shifts during the pour. That rigidity matters: loose components introduce variables, and variables are the enemy of repeatable ammo.

The .244" diameter and 95-grain weight are sized for specific rifle cartridges; confirm your load data matches before casting. Handles are available separately if you need them, giving you flexibility to outfit the mould exactly how you want it. Whether you're casting for hunting, target work, or general plinking, this double-cavity design from a trusted reloading name gets the job done efficiently.

Key Features

• Double-cavity design casts two bullets per cycle for faster production
• Precision-ground cast iron blocks for consistent dimensions and clean castings
• 3/16-inch solid steel sprue plate with tempered spring washers and screws for secure fit
• Sized for .244" diameter, 95-grain bullets
• Optional handles available separately

Specifications

Frequently Asked Questions

What cartridges can I load these bullets for?

The .244" diameter and 95-grain weight are designed for specific rifle cartridges. Consult your reloading manual to confirm which rounds match this bullet specification before casting, as using the correct bullet-to-cartridge pairing is critical for safe and accurate reloads.

Does this mould come with handles?

No, handles are sold separately. You can purchase them from RCBS at a low cost if you need them for your casting setup.

How many bullets does this mould produce per cycle?

The double-cavity design produces two bullets with each pour, doubling your output compared to a single-cavity mould.

Will the sprue plate stay secure during casting?

Yes. The 3/16-inch solid steel sprue plate is held tightly in place by tempered spring washers and screws, preventing movement and ensuring consistent castings.