Rcbs Keith Type Pistol Bullet Mould - Double Cavity .430" 250Gr

The RCBS Keith Type Pistol Bullet Mould is a double-cavity casting tool designed for handloaders who want to produce consistent, quality cast bullets at home. This .430" mould casts 250-grain projectiles—a proven weight for medium and large-bore pistol cartridges. Whether you're working with .44 Magnum, .44 Special, or similar calibers, a quality bullet mould is the foundation of repeatable cast-bullet reloading. The Keith design is a classic, respected profile trusted by precision shooters and hunters who rely on cast ammunition.

Built from solid cast iron, the mould's blocks are machined to exact specifications to ensure shot-to-shot consistency and clean casting sessions. The construction begins with precision-ground blocks squared and aligned with hardened steel pins before machining, eliminating slop and drift during use. This attention to detail matters when you're casting dozens or hundreds of bullets—poor alignment leads to voids, uneven weight, and wasted lead and time.

A 3/16-inch solid steel sprue plate handles the business end of the casting process. Tempered steel spring washers and screws secure it firmly in place, resisting wear and vibration over thousands of castings. The mould comes without handles; RCBS offers affordable, separate handle sets that attach easily and allow you to work comfortably at your casting station.

If you're already set up for bullet casting or planning to build a home reloading bench, this is a straightforward, dependable tool. It does one job well: produce uniform .430" 250-grain bullets, cast after cast.

Key Features

• Double-cavity design for faster bullet production per casting cycle
• Solid cast iron blocks machined to exact specifications for accuracy and consistency
• Precision-ground, squared blocks with hardened steel alignment pins for reliable mating
• 3/16-inch solid steel sprue plate with tempered spring washers and screws for secure, durable closure
• Casts .430" diameter, 250-grain bullets suitable for large-bore pistol cartridges
• Handles sold separately

Specifications

Frequently Asked Questions

What calibers can I cast with this .430" 250-grain mould?

The .430" diameter and 250-grain weight make this mould suitable for large-bore pistol cartridges such as .44 Magnum, .44 Special, and other .430"-bore handgun loads. Always verify the exact bullet diameter required by your specific cartridge and rifle or handgun before casting.

Do I need handles for this mould, and are they included?

Handles are not included and are sold separately by RCBS. They attach to the mould and are required for safe, comfortable use at your casting station.

Is this mould suitable for a beginner bullet caster?

This is a straightforward, well-made casting tool. If you already have a lead pot, handles, and basic casting setup, this mould will work well. If you're completely new to bullet casting, you may want to research the full setup required—lead melting equipment, casting handles, sizing and lubricating equipment, and safety gear—before purchasing.

What makes the double-cavity design useful?

A two-cavity mould casts two bullets per cycle, roughly doubling your output compared to a single-cavity tool while using the same amount of time and lead per casting. This adds up to significant time savings if you cast regularly or in volume.