RCBS Full-Length Die Set - Group D - 30 Remington Reloading Dies
$97.43
$98.45
(You save
$1.02
)
The RCBS Full-Length Die Set for 30 Remington gives you the two essential tools needed to reload bottleneck rifle brass with consistency and precision. Whether you're working up loads for a classic hunting rifle or preparing ammunition for the range, this Group D die set handles the core reloading operations: sizing the case to SAAMI minimum dimensions and seating bullets with a crimp to lock them in place. Full-length sizing is the foundation of rifle reloading—it returns fired brass to factory dimensions so it chambers reliably in your rifle, and this set does that job with the vented design and tight headspace control RCBS is known for.
The Full-Length Sizer Die does the heavy lifting: it sizes the case body, removes the spent primer (via the integrated Expander-Decapping Unit), and opens the neck to accept a new bullet. The vented construction is practical—it lets air and excess lubricant escape during the sizing stroke, reducing the risk of case damage from pressure buildup. Headspace is held to minimum tolerances so the case body length stays consistent from round to round, which matters for reliable feeding and performance.
The included Seater Die seats the bullet and applies a roll crimp simultaneously. That two-step operation in one motion streamlines your reloading sequence and helps maintain uniform bullet seating depth and crimp tension. If you're setting up a progressive press or prefer the simplicity of a single-stage loader, this die set is built to fit RCBS and most standard reloading presses with 7/8×14 threads.
Key Features
- Full-Length Sizer Die with integrated Expander-Decapping Unit for complete case preparation
- Vented die design reduces risk of case damage from trapped air and excess lubricant
- Headspace held to minimum tolerances for consistent case body length
- Seater Die with built-in roll crimper to seat bullet and crimp in one operation
- Designed for 30 Remington bottleneck brass
Specifications
| Cartridge | 30 Remington |
| Die Type | Full-Length Sizing Set (2-Die) |
| Dies Included | Full-Length Sizer Die with Expander-Decapping Unit; Seater Die with Bullet Seater Plug and Roll Crimper |
| Press Compatibility | 7/8×14 thread (standard RCBS and most reloading presses) |
| Case Type | Bottleneck rifle cartridge |
Frequently Asked Questions
What do I need to use this die set?
This is a 2-die set containing the essential dies for reloading bottleneck rifle brass. You'll also need a reloading press with 7/8×14 threads, a scale or powder measure, primers, powder, bullets, and cases. The primer removal and decapping is handled by the Full-Length Sizer Die, so you don't need a separate decapping tool.
Is the 30 Remington die set compatible with my reloading press?
This die set is designed for presses with standard 7/8×14 inch threads, which includes RCBS presses and most other major single-stage and progressive reloading presses. Check that your press uses this standard thread size before ordering.
Does the roll crimper come installed in the seating die?
Yes, the Seater Die includes a built-in roll crimper and bullet seater plug. The crimper operates as you seat the bullet, so both operations happen in a single stroke.
Why are the dies vented?
The vented design allows air and excess lubricant to escape during the sizing stroke, which reduces the risk of case bulging or damage caused by pressure buildup inside the case during full-length sizing.
