RCBS 9230 Single Stage Shell Holder #30 for 41 Remington Magnum
$9.38
$9.95
(You save
$0.57
)
- Type:
- Shell Holder
- Caliber-Gauge:
- 41 Remington Magnum
- Finish-Color:
- Silver
- Quantity:
- 1
- Size:
- #30
- Material:
- Steel
- Weight:
- 4 oz
- Function:
- Shell Holder
The RCBS 9230 Single Stage Shell Holder #30 is a precision-engineered component built for reloaders working with 41 Remington Magnum ammunition. If you're setting up a single-stage or turret press for .41 Mag handloading, this shell holder is the critical link between your press and your brass—it ensures your cases are perfectly aligned with your dies for consistent, safe ammunition production. Made from hardened steel, it's built to handle repeated loading cycles without wear or deflection that could throw off your headspacing or concentricity.
Proper case alignment isn't just about accuracy; it's about safety. When your brass sits at the wrong angle or depth in the die, you risk dimensional inconsistencies, difficult extraction, or worse. This shell holder captures 0.125 inch of the case head, holding it in exactly the right position so your dies work on the case body and shoulder the way they're designed to. That precision matters whether you're loading match-grade handgun rounds or hunting ammunition.
The #30 designation means this holder is sized specifically for 41 Remington Magnum case heads. If you reload multiple cartridges, you'll need a separate shell holder for each—a small investment that pays dividends in consistency and reliability. It's a simple part with a single, critical job: keep your brass square to the die every single time.
Key Features
- Hardened steel construction for durability under repeated use
- Sized and numbered specifically for 41 Remington Magnum
- Captures 0.125 inch of case head for proper SAAMI headspacing alignment
- Compatible with single-stage and turret reloading presses
- Ensures consistent case-to-die positioning for safe, uniform ammunition
Specifications
| Product | RCBS 9230 Single Stage Shell Holder #30 |
| Caliber/Application | 41 Remington Magnum |
| Material | Hardened steel |
| Case Head Capture Depth | 0.125 inch |
| Press Type | Single-stage and turret presses |
Frequently Asked Questions
Will this shell holder work in my RCBS single-stage press?
Yes. The RCBS 9230 is designed for use in RCBS single-stage presses and is also compatible with turret presses. It will not work in progressive presses, which use a different shell holder system.
Can I use this for 41 Remington Magnum handloading?
Yes. The #30 designation indicates this shell holder is sized specifically for 41 Remington Magnum case heads. It's the correct choice for reloading this caliber in single-stage or turret equipment.
Do I need a different shell holder for each caliber I reload?
Yes. Shell holders are caliber-specific and sized to fit the case head diameter of each cartridge. If you reload multiple calibers, you'll need a separate shell holder for each one.
What does the 0.125-inch case head capture do?
The shell holder grips 0.125 inch of the case head, which positions your brass at the correct depth and angle in relation to your reloading dies. This ensures proper SAAMI headspacing and consistent case alignment for uniform ammunition production.
