RCBS 9202 Single Stage Shell Holder #2 Multi-Caliber Steel 4oz for Reloading

The RCBS 9202 Single Stage Shell Holder #2 is a hardened steel component built to anchor your cartridge cases during the reloading process. If you're running a single-stage or turret press and need consistent case alignment with your dies, this holder ensures your cases sit at the correct headspace every time you pull the handle. It's sized to accommodate specific case head dimensions and captures 0.125 inch of the case head—the engineering that keeps your reloads safe and repeatable.

Shell holders are one of those often-overlooked details that separate solid reloading from sloppy reloading. The right holder for your caliber means zero case wandering, better concentricity, and dies that wear evenly. This is hardened steel, not stamped tin, so it'll outlast your press if you treat it right.

The #2 designation tells you which case families this holder accommodates—that specificity matters. If you're loading multiple calibers, you'll likely need different holders for different cartridge head sizes, but once you've got the right one in the socket, you're set. At 4 ounces, it's a straightforward, no-frills reloading component that does one job and does it well.

Key Features

• Hardened steel construction for durability and precise case holding
• Captures 0.125 inch of case head for proper SAAMI headspacing alignment
• Sized for specific case head dimensions to prevent case shifting in press
• Compatible with single-stage and turret reloading presses
• Ensures consistent die contact and case concentricity across multiple reloading cycles

Specifications

Frequently Asked Questions

What calibers does the RCBS #2 shell holder work with?

The #2 designation indicates this holder is sized for a specific range of case head diameters. Consult RCBS compatibility charts or your press manual to confirm which cartridges fit the #2 holder—different caliber families require different holders.

Can I use this shell holder with a single-stage press?

Yes. The RCBS 9202 is designed for single-stage and turret presses. Insert it into the ram of your press to secure and align your case during the reloading stroke.

Why does the shell holder capture only 0.125 inch of the case head?

That 0.125 inch of case head contact is the SAAMI standard for proper headspacing and case alignment. It positions the cartridge at the correct depth so the die performs consistently and safely.

Will this shell holder work if I upgrade my reloading press?

Shell holders are standardized components, so the #2 should fit most single-stage and turret presses that use RCBS-style shell holder sockets. Verify your new press uses the same socket design before assuming compatibility.