RCBS 13301 F L Die Set 6.8mm Remington Special
$53.35
The RCBS 13301 FL Die Set for 6.8mm Remington Special gives you the two essential dies needed to start reloading bottleneck rifle cartridges. This is a complete set built around the full-length sizing approach, the most common method for rifle reloaders who want consistent, reliable rounds shot after shot. Whether you're setting up a new press or expanding into another caliber, this two-die set handles the core operations: resizing and decapping fired cases, then seating and crimping fresh bullets.
The Full-Length Sizer Die in this set brings fired 6.8mm Remington Special cases back to SAAMI minimum dimensions, sizing the case body and neck while the integrated Expander-Decapping Unit removes the old primer and opens the neck to accept a new bullet. RCBS engineered vents into the die to prevent air traps and excessive lube from damaging cases during the sizing stroke. The design keeps headspace at minimum tolerances so your case length stays true and doesn't stretch or shorten unpredictably during sizing.
The Seater Die completes the operation with a built-in roll crimper that secures the bullet in the case neck simultaneously as you seat it to depth. This two-operation approach—one die to resize and decap, one to seat and crimp—is the workhorse method trusted by handloaders who need consistency and simplicity. If you reload 6.8mm Remington Special, this set gives you a proven path to safe, accurate ammunition.
Key Features
- Two-die set for 6.8mm Remington Special bottleneck cartridges
- Full-length sizer die with integrated expander-decapping unit
- Seater die with built-in roll crimper
- Vented sizer die to prevent case damage from trapped air and excess lubricant
- Headspace held to minimum tolerances for consistent case length
Specifications
| Caliber | 6.8mm Remington Special |
| Die Count | 2 |
| Die Type | Full-length sizer and seater |
| Manufacturer | RCBS |
| Model | 13301 |
Frequently Asked Questions
What does the RCBS 13301 set include?
The set includes two dies: a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with a built-in roll crimper. These two dies handle the essential steps of rifle case reloading—resizing/decapping and bullet seating/crimping.
Can I use this die set on any press?
The facts provided do not specify press compatibility. Consult your press manual or contact RCBS directly to confirm fit with your equipment.
What is the roll crimper in the seater die for?
The roll crimper secures the bullet into the case neck at the same time you seat the bullet to your desired depth, creating a mechanically consistent crimp that helps hold the bullet in place during handling and firing.
Why does this sizer die have vents?
The vents prevent case damage caused by air trapped inside the case during the sizing stroke and help prevent excess lubricant buildup, which can also damage cases. This design protects your brass so you can reload it reliably for many cycles.
