The MDT XRS Forend Weight is a steel balance tuning accessory designed for shooters running the MDT XRS Chassis System. If you're chasing precision on the range or in the field, rifle balance matters—a properly balanced gun reduces felt recoil and lets you stay on target through follow-up shots. This single-piece weight slides into the forend of your XRS chassis to shift the balance point forward, giving you the control you need for consistent shooting.
Installation is straightforward: the weight slides under the barrel and locks down with six included flat-head cap screws. The nitrided steel finish resists corrosion in the field, and the design includes underside clearance for M-LOK nut relief so it won't interfere with your rail setup. At 1 pound of added weight, you'll notice the difference in how the rifle handles, especially during extended shooting sessions or when transitioning between targets.
Fit matters here—the forend weight is engineered specifically for the XRS Chassis and accommodates barrel contours up to 1.25" in diameter. If your XRS chassis was purchased before 2021, you'll need MDT's retrofit kit to ensure compatibility with this weight. That's a detail worth confirming before ordering, so you get it right the first time.
Key Features
- Single-piece steel construction for durability and consistent weight
- Adds 1 lb of weight to tune rifle balance and reduce felt recoil
- Nitrided finish for corrosion resistance in harsh conditions
- Slides into XRS forend with no gunsmithing required
- Includes all mounting hardware (six #10-24 x 5/8" flat-head cap screws)
- M-LOK nut clearance slot preserves rail mounting options
- Fits barrel contours up to 1.25" diameter
Specifications
| Material | Steel, nitrided finish |
| Weight Added | 1 lb |
| Dimensions | 10" L × 1.125" W × 0.5" H (approximate) |
| Barrel Clearance | Fits contours up to 1.25" diameter |
| Hardware Included | Six #10-24 × 5/8" flat-head cap screws |
| Compatibility | MDT XRS Chassis System (2021 and newer; earlier chassis may require retrofit kit) |
Frequently Asked Questions
Will this forend weight fit my MDT XRS Chassis?
The XRS Forend Weight is compatible with the MDT XRS Chassis System. If you purchased your chassis before 2021, you'll need MDT's retrofit kit to use this weight. Chassis built in 2021 and later are compatible out of the box.
How much weight does it add, and will it really reduce recoil?
The weight adds 1 pound to the forend. By shifting the balance point forward, a heavier forend naturally reduces the perceived snap of recoil and helps keep the rifle steadier through the shot, which translates to better follow-up accuracy.
What's included, and how hard is installation?
The weight comes with all six mounting screws (#10-24 × 5/8" flat-head cap screws) needed for installation. It slides under the barrel and fastens to your XRS forend—no gunsmithing or special tools required.
Will it interfere with my M-LOK rail or barrel contour?
The weight includes an underside clearance slot for M-LOK nut relief and fits barrel contours up to 1.25" in diameter. Check your barrel profile against that spec to ensure compatibility.
