Mdt Sporting Goods Inc 107203BLK LRA S90 Bracket for Send It MV3 and Spuhr Mounts Black

The LRA S90 Bracket for Send It MV3 and Spuhr Mounts is a specialized mounting adapter that lets you position a Send It MV3 level directly on select Spuhr scope rings in the vertical orientation. If you're building a precision long-range rifle with a Spuhr mount and need to add the Send It MV3 bubble level to your setup, this bracket is the mechanical link that makes it work. It's manufactured in the USA and ships with all the hardware you need for installation.

This bracket is designed to work with Spuhr SP, SA, SS, and ST model mounts. Note that some applications may require an additional Spuhr 4mm spacer (sold separately) — check with your dealer on your specific mount to confirm. Installation requires attention to detail: screw lengths must be verified before assembly to prevent bottoming out against the scope tube or other components, and proper torque specs must be followed during setup.

The bracket comes ready to go with fasteners and clear assembly instructions. Two 4mm x 10mm flat-head screws secure the bracket to your Spuhr mount (torque to 20–25 in-lbs), and one #8-32 flat-head screw attaches the Send It MV3 level itself (torque to 30–34 in-lbs). If you're piecing together a custom long-range rig and want the flexibility of a vertical-mount bubble level, this bracket handles the job.

Key Features

• Mounts Send It MV3 level to Spuhr SP, SA, SS, and ST rings in vertical position
• Manufactured in the USA
• Includes all fasteners for installation (#8-32 screw and two 4mm x 10mm screws)
• Requires torque wrench and appropriate Allen/Torx drive for proper assembly

Specifications

Frequently Asked Questions

What mounts is this bracket compatible with?

The LRA S90 Bracket works with Spuhr SP, SA, SS, and ST model scope rings. Some applications may require an optional Spuhr 4mm spacer — contact your Spuhr dealer to confirm your specific mount.

What hardware is included?

The bracket ships with one #8-32 flat-head screw for attaching the Send It MV3 level and two 4mm x 10mm flat-head screws for securing the bracket to your Spuhr mount. You'll need an Allen wrench (3/32) and a Torx Plus or Torx drive (IP20 or T20) to install it.

Do I need to buy the Send It MV3 separately?

Yes, the Send It MV3 level is sold separately. This bracket is the adapter that connects it to your Spuhr rings.

What should I check before final assembly?

Before tightening fasteners, verify that screw lengths are correct for your specific setup — in some applications, overly long screws can bottom out against the scope tube or other components. Always check for interference, and follow the supplied torque specifications (20–25 in-lbs for the bracket fasteners, 30–34 in-lbs for the level fastener).