Magpul MAG1421BLK Hunter Lite Stock Black Fits Ruger American Short Action

The Magpul MAG1421BLK Hunter Lite Stock is a purpose-built upgrade for Ruger American short-action rifles that strips away excess weight without sacrificing capability. If you're putting in hard miles in the field—whether you're glassing ridges, stalking through timber, or grinding up elevation—this stock cuts roughly 25% off the weight of Magpul's original Hunter American design while keeping the features that matter. At 2.6 lbs with two spacers installed, it's lean enough that you'll notice the difference in your pack or across your shoulders during a long day of hunting.

Magpul engineered the Hunter Lite with genuine adjustability built in. You get four removable half-inch spacers to dial in length of pull from 13 to 15 inches, plus a snap-on 3/8-inch cheek riser for comb height, so you can fit the stock to your frame and your shooting position rather than forcing yourself into a one-size-fits-most compromise. The forend is also 25% narrower than the original, making the rifle feel balanced and handy. An aluminum V-bedding block with reinforced steel pillars keeps your action locked down without movement or flex, and the buttstock and forend both have integral sling swivel studs—you're ready to mount your strap or bipod without drilling or modification.

The Hunter Lite accepts Ruger factory barrels and aftermarket profiles up to Medium Palma diameter, and it's configured for AICS-pattern magazines with an ambidextrous release paddle. An enlarged trigger guard won't pinch your hand even when you're wearing heavy gloves, and M-LOK slots along the forend let you mount lights, grips, or other accessories as your setup demands. The stock ships user-configurable for either right or left-hand rifles—just swap the inlet insert to match your rifle's action.

Made in the USA, the Hunter Lite is finished in Magpul's durable black. It's compatible with Ruger American and Ruger American Generation II rifles chambered in short-action calibers—just verify your rifle wasn't originally equipped with an AR-magazine-capable stock from the factory.

Key Features

• Lightweight design at 2.6 lbs—approximately 25% less weight than the standard Hunter American stock
• Adjustable length of pull (13–15 inches) using four removable half-inch spacers
• Snap-on 3/8-inch cheek riser for customizable comb height
• Extruded aluminum V-bedding block with reinforced steel pillars for rigid action support
• User-configurable for right or left-hand rifles via inlet insert swap
• AICS-pattern magazine well with ambidextrous magazine release
• Enlarged trigger guard for comfortable gloved operation
• Integral sling swivel studs on buttstock and forend
• M-LOK slots for mounting accessories
• Accepts factory and aftermarket barrels up to Medium Palma profile
• Narrow forend profile for improved handling and balance
• Made in the USA

Specifications

Frequently Asked Questions

Is the Hunter Lite compatible with my Ruger American rifle?

The Hunter Lite is designed for Ruger American and Ruger American Generation II rifles chambered in short-action calibers. It will not fit rifles originally equipped with an AR-magazine-capable stock from the factory. It accommodates most factory and aftermarket triggers and accepts factory or aftermarket barrels up to Medium Palma profile.

Can I use this stock on both left and right-hand rifles?

Yes. The Hunter Lite ships with a user-swappable inlet insert, allowing you to configure it for either right or left-hand rifles without additional parts or gunsmithing.

What's included in the box?

The stock comes with four removable half-inch buttstock spacers for length-of-pull adjustment and a snap-on 3/8-inch cheek riser. Magazines are sold separately.

Does the Hunter Lite work with aftermarket barrels?

Yes, the forend accommodates aftermarket barrel profiles up to Medium Palma (0.920" diameter, measured 5.50" forward of the breech). If your barrel is thicker than that profile, it may not fit properly.