Lee Semi-Wadcutter Pistol Mould - Double Cavity (Handles Included) .410" 210 gr

The Lee Semi-Wadcutter Pistol Mould with double cavity and handles is a practical choice for handloaders casting their own bullets. This aluminum mould is designed to produce .410" diameter semi-wadcutter bullets weighing 210 grains—a weight suited to medium-powered pistol loads. With two cavities per pour, you'll increase casting efficiency compared to single-cavity moulds, making production runs faster and more economical when you're working up test loads or preparing ammunition in volume.

Built from aluminum with permanently attached steel handles, this casting mould balances durability with usability. Aluminum won't rust and weighs less than steel or iron alternatives, reducing fatigue during extended casting sessions. The lighter material also heats and cools more quickly, which translates to faster cycles between pours—a real advantage when you're casting dozens or hundreds of bullets in a session. While aluminum is softer than hardened steel and requires careful handling to avoid dings, proper use will yield years of reliable service.

Whether you're loading for a revolver or semi-automatic pistol, casting your own semi-wadcutter bullets lets you tailor performance and cost to your specific needs. This mould gives you the flexibility to experiment with different alloys and load combinations without the overhead of factory ammunition prices.

Key Features

• Double cavity design speeds up casting runs
• Aluminum construction resists rust and reduces caster fatigue
• Faster heat cycling than steel or iron moulds
• Steel handles permanently attached for secure grip
• Produces .410" diameter, 210-grain semi-wadcutter bullets

Specifications

Frequently Asked Questions

What caliber pistols can I load for with this mould?

This mould casts .410" diameter bullets, which are suitable for 38 Special, 357 Magnum, and similar cartridges that use .38-.357 caliber projectiles. Always verify bullet diameter matches your specific cartridge before loading.

Why choose a double cavity mould over single cavity?

A double cavity mould lets you cast two bullets per pour, roughly doubling your output per casting session compared to a single cavity design. This efficiency matters when you're preparing ammunition in batches.

Is this mould included with handles, or do I need to buy them separately?

Handles are included. The steel handles are permanently attached to the aluminum blocks, so you're ready to cast right out of the box.

How do I care for an aluminum mould to keep it in good condition?

Handle the mould gently to avoid dents or damage to the cavities. Aluminum won't rust like steel, but the softer material can be dinged if dropped or bumped. Store it in a dry place and it will serve you reliably for years.