Lee Precision .25-06 Remington Full Length Sizing Die Only

The Lee Precision .25-06 Remington full length sizing die restores fired brass to factory dimensions, preparing cases for a fresh reload. Unlike neck-sizing dies that work only on the case neck, a full-length sizing die resizes both the neck and body of the cartridge—making it the right choice if you shoot .25-06 Remington in multiple rifles or want maximum versatility when pressing ammunition. After firing, brass expands to fit your chamber; this die brings it back to spec and removes bulges or irregularities created during firing.

Full-length sizing is the reloading standard for hunters, match shooters, and anyone who values consistency across different firearms or wants to ensure reliable chambering shot to shot. The process takes patience and attention to setup, but the payoff is cases that feed smoothly and perform reliably. This is the die only—you'll need a reloading press and the rest of your components separately.

Setting up correctly matters: the die must be adjusted to bump the case shoulder back by approximately 0.001 inch, and you'll want to check that bump every 10 cases or so as you work through a batch. Proper lubrication of cases before sizing is essential, and avoiding overwork of the brass prevents case head separation down the line. Lee Precision dies are built to exacting tolerances and backed by a company with decades of reloading knowledge.

Key Features

• Resizes neck and body for full-length case restoration
• Works with any rifle chambered in .25-06 Remington
• Removes firing-induced bulges and irregularities
• Engineered for safe, consistent brass life
• Die only—requires separate press and reloading setup

Specifications

Frequently Asked Questions

What's the difference between a full-length sizing die and a neck-sizing die?

A full-length sizing die resizes both the neck and body of the cartridge case, restoring the entire case to original dimensions. A neck-sizing die works only on the neck. Full-length sizing is more versatile—it works across multiple rifles in the same caliber and is the standard choice for most reloaders.

Do I need a reloading press to use this die?

Yes. This is the die only. You'll need a separate reloading press, shell holder, and other components to set up a complete reloading system.

How often should I check the shoulder bump while sizing?

You should verify the shoulder bump every 10 cases or so during a sizing session. Slight adjustments may be needed as you work through a batch to maintain the correct 0.001-inch shoulder setback.

Can I use this die in multiple .25-06 rifles?

Yes. A full-length sizing die is designed to work with any rifle chambered in .25-06 Remington, making it ideal if you own more than one rifle in that caliber or plan to share ammunition among compatible firearms.