The L.E. Wilson Steel Neck Sizer Die Bushing .270 is a hardened stainless steel neck bushing built for reloaders who demand precision and flexibility in their cartridge prep. Wilson manufactures these bushings in precise .001" increments, giving you the fine-tuning control that matters when you're chasing tight groups or breathing new life into work-hardened brass. Whether you're loading match rounds or hunting ammunition, this bushing lets you dial in consistent neck tension—a critical factor in consistent velocity and accuracy.
Unlike generic bushings, Wilson's design includes a .003" taper reamed into each bushing. The marked size refers to the middle diameter, which means you have options: use it in the normal orientation for standard sizing, or flip it around (markings facing the case) to achieve slightly tighter sizing. That flexibility is invaluable when brass has hardened and won't hold bullets the way it used to, or when you need to fine-tune neck tension without stepping down to the next smaller bushing. It's the kind of thoughtful engineering that separates quality reloading dies from one-trick tools.
L.E. Wilson bushings are manufactured to similar specifications as Redding neck bushings, but they won't work in Forster or RCBS dies—compatibility matters, so verify your die body before ordering. If you're already running Wilson or Redding equipment, this .270 bushing integrates seamlessly into your reloading setup.
Key Features
- Hardened stainless steel construction for durability and repeatability
- Manufactured in .001" increments for precise neck sizing control
- .003" taper design with reversible orientation for flexible sizing options
- Compatible with L.E. Wilson and Redding die bodies
- Ideal for precision handloading, match ammunition, and work-hardened brass recovery
Specifications
| Brand | L.E. Wilson |
| Product Type | Steel Neck Sizer Die Bushing |
| Caliber | .270 |
| Material | Hardened Stainless Steel |
| Increment | .001" |
| Taper | .003" |
Frequently Asked Questions
Will this bushing fit my Forster or RCBS die?
No. L.E. Wilson bushings are not compatible with Forster or RCBS dies. They are designed for L.E. Wilson and Redding die bodies. Verify your die brand before purchasing.
How do I choose the right bushing size?
You have two methods: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003" to allow for brass spring-back and proper neck tension. (2) Measure the neck wall thickness of your case, multiply by two, add your bullet diameter, then subtract .002" to .003". Both approaches account for the slight tension needed to hold the bullet securely.
Can I flip the bushing over for tighter sizing?
Yes. The bushing is reversible—flip it so the markings face toward the case (markings facing down) to achieve slightly tighter sizing. This is useful for fine-tuning when brass has hardened and springs back more, or when you need finer control than stepping down to the next smaller bushing would provide.
What's the difference between the marked size and actual sizing diameter?
The size marked on the bushing refers to its middle diameter. The bushing includes a .003" taper reamed throughout. Since the case neck only reaches the middle during sizing, you can adjust your results by flipping the bushing for slightly different neck tension without changing bushings.
