The L.E. Wilson Steel Neck Sizer Die Bushing .262 is a hardened stainless steel neck sizing component designed for precision handloaders who demand consistency and control over bullet seating tension. This .262 bushing works with L.E. Wilson neck sizing dies to help you fine-tune case neck diameter and ensure repeatable, uniform pressure around the bullet. Whether you're a long-range competitor working toward tighter groups or a hunter optimizing load development for your rifle, a properly sized neck bushing keeps your ammunition performing exactly as you intended.
L.E. Wilson manufactures their bushings in .001" increments, so each bushing is engineered to a specific dimension. The marked size represents the middle of the bushing, which is reamed with a .003" taper. Because case necks contact the bushing at its midpoint, you can actually flip the bushing over (markings facing the case) to achieve slightly tighter sizing—a useful trick when brass has hardened and needs extra squeeze to hold the bullet, or when you're fine-tuning neck tension without dropping to the next smaller bushing size. This gives you precision adjustment in your reloading process without investing in multiple die sets.
These steel bushings are built to the same specifications as Redding neck bushings, making them a solid choice for shooters who already own L.E. Wilson dies. Be aware: they are not compatible with Forster or RCBS dies, so confirm your sizing die brand before ordering.
Selecting the right bushing is straightforward. Measure your loaded cartridge's outside neck diameter and subtract .002" to .003" to account for normal brass spring-back and establish proper neck tension. Alternatively, measure your case neck wall thickness, multiply by two, add your bullet diameter, and subtract .002" to .003". The result tells you which bushing you need for optimal performance.
Key Features
- Hardened stainless steel construction for durability and corrosion resistance
- Manufactured in .001" increments for precise neck diameter control
- Tapered reamer design (.003" taper) for even bushing contact
- Reversible design allows flipping for tighter sizing without changing bushings
- Compatible with L.E. Wilson neck sizing dies
- Enables fine-tuning of bullet seating tension for consistency
Specifications
| Brand | L.E. Wilson |
| Product Type | Steel Neck Sizer Die Bushing |
| Bushing Size | .262" |
| Material | Hardened Stainless Steel |
| Bushing Increment | .001" |
| Taper | .003" |
| Compatibility | L.E. Wilson neck sizing dies only; not compatible with Forster or RCBS |
Frequently Asked Questions
Will this bushing fit my Forster or RCBS sizing die?
No. L.E. Wilson steel neck bushings are designed exclusively for L.E. Wilson neck sizing dies and will not interchange with Forster or RCBS equipment. Confirm your die brand before ordering.
How do I select the correct bushing size for my cartridge?
Measure your loaded cartridge's outside neck diameter and subtract .002" to .003" to account for brass spring-back and establish proper neck tension. Alternatively, measure your case neck wall thickness, multiply by two, add your bullet diameter, and subtract .002" to .003". The result is your ideal bushing size.
Can I flip this bushing upside down for different sizing?
Yes. You can reverse the bushing so the markings face the case to achieve slightly tighter sizing. This is useful when brass has hardened and needs extra squeeze to hold the bullet, or for fine-tuning neck tension without purchasing the next smaller bushing size.
What's the difference between the marked size and actual sizing?
The marked size represents the middle of the bushing, which is reamed with a .003" taper. Since case necks contact the bushing at its midpoint, this marked dimension is where your neck diameter is actually sized. The taper design ensures consistent contact throughout the bushing.
