L.E. Wilson 6.5Mm (0.2665''-0.267'') Inside Neck Reamer
$40.48
Reloaders working with 6.5mm cartridges know that brass gets thicker with use. After multiple firings and resizing cycles, material buildup inside the case neck can create dangerous pressure spikes and throw off shot groups. The L.E. Wilson 6.5mm (0.2665"–0.267") inside neck reamer is built specifically to clean and normalize case necks, restoring them to the right wall thickness so your loads shoot straight and safe.
This reamer works on fired, as-cast brass—you don't need to size first. It's sized larger than bullet diameter by design, letting you skim excess brass from the inside of the neck without removing metal you need. Whether you're sorting through once-fired range brass or prepping your favorite hunting loads for another trip downrange, consistent neck thickness means consistent velocities and tighter groups. The tool also proves useful when forming wildcats from parent cases, giving wildcatters one more way to fine-tune their custom brass.
Made in the U.S.A., the L.E. Wilson inside neck reamer comes with a knob-style handle so you can get started right away. If your 6.5mm chambers run tight or your brass shows signs of uneven neck wear, a couple of minutes with this reamer can turn a box of marginal brass into ammo you'll trust at the range or in the field.
Key Features
- Sized for 6.5mm (.2665"–.267") case necks
- Use on fired, unsized brass—no need to resize first
- Removes material buildup to reduce pressure spikes and shooting inconsistency
- Ideal for wildcat brass forming and case preparation
- Includes knob-style handle for immediate use
- Made in the U.S.A.
Specifications
| Caliber | 6.5mm |
| Size Range | 0.2665"–0.267" |
| Type | Inside Neck Reamer |
| Suitable For | Fired, unsized brass |
| Included | Reamer + Knob-Style Handle |
| Country of Origin | U.S.A. |
Frequently Asked Questions
Can I use this reamer on sized brass, or does it only work on fired cases?
The L.E. Wilson inside neck reamer is sized for use on fired, unsized brass. The stock size is larger than bullet diameter to allow proper cleanup of as-fired cases. If your brass is already sized, contact L.E. Wilson about custom sizing options.
What problem does an inside neck reamer solve?
With each firing and sizing cycle, brass builds up inside the case neck. This material accumulation can cause high chamber pressures, erratic velocity, and poor accuracy. An inside neck reamer removes that buildup to restore consistent neck wall thickness, helping you get reliable, uniform loads.
Will this reamer help me form wildcat cartridges?
Yes. Inside neck reamers can be used when forming wildcats from a parent case, making this reamer a useful tool in wildcat brass preparation.
What's included with the reamer?
The L.E. Wilson inside neck reamer comes with one knob-style handle so you're ready to start reaming right out of the box.
