Hornady Match Grade Bushing .308"

The Hornady Match Grade Bushing .308" is a precision neck sizing bushing designed for reloaders who want exact control over case neck tension without excessive brass working. This .308-inch bushing is a drop-in component for Hornady Match Grade dies, letting you fine-tune how snugly your cases grip the bullet. By choosing the right bushing size, you avoid over-sizing case necks—a common problem with traditional full-length dies—and extend brass life across more reload cycles. Available in .002-inch increments, these bushings are the key to consistent, repeatable loads that shoot tighter groups.

Match Grade bushings work in both full-length and neck-only die configurations. In a full-length die, the bushing sizes the neck while the die handles body sizing and shoulder bumping. Swap to a neck-only die with the same bushing, and you size just the neck and bump the shoulder—ideal for once-fired brass or when you want minimal case manipulation. The bushings are self-centering, so they position themselves correctly in the die without fussy setup adjustments.

Hornady pairs these bushings with professional-grade internals: a self-centering decap spindle with an o-ring tensioner and an elliptical expander ball with a headed decap pin. The same durability and finish you get in Hornady's Custom Grade line carries over here, making Match Grade dies and bushings a solid investment for serious handloaders chasing precision and brass longevity.

Key Features

• Precision .308-inch bushing for controlled case neck sizing
• Self-centering design for consistent, repeatable setup
• Available in .002-inch increments to match your bullet tension needs
• Works with Hornady Match Grade full-length and neck-only dies
• Reduces case neck over-sizing and extends brass life
• Professional finish and construction for reliability across many reload cycles

Frequently Asked Questions

What's the difference between a .308" bushing and standard full-length sizing?

A full-length die typically sizes the entire case neck to one standard dimension. A bushing die lets you choose from a range of sizes in .002-inch steps, so you can dial in the exact neck tension your load requires. This reduces unnecessary brass working and extends case life.

Can I use this bushing in both full-length and neck-only dies?

Yes. The same .308" bushing works in Hornady Match Grade full-length dies (which size the neck, bump the shoulder, and size the body) and Match Grade neck-only dies (which size just the neck and bump the shoulder).

What caliber is this bushing for?

This is a .308-inch bushing, designed for .308 Winchester and other cartridges that use .308-inch bullets, such as 7.62 NATO.

What comes with the bushing?

You receive the interchangeable .308-inch bushing itself. It is installed in a Hornady Match Grade die; the die is not included with the bushing alone.