Hornady Match Grade Bushing .292"

The Hornady Match Grade Bushing .292" is a precision neck sizing bushing designed for reloaders who run Hornady Match Grade dies and demand consistent case neck tension. This .292" bushing lets you fine-tune how tightly your cases grip your bullets—a critical variable that many reloaders overlook. By selecting the right bushing size, you avoid the brass-killing trap of over-sizing case necks, which accelerates work-hardening and shortens case life. Hornady produces these bushings in .002" increments, so you can dial in the exact neck tension your loads require.

Match Grade bushing dies are built around the principle that case preparation is where precision reloading begins. The .292" bushing works with either the Match Grade Full Length Die (which sizes the body, bumps the shoulder, and sizes the neck) or the Match Grade Neck Die (neck sizing and shoulder bump only, no body sizing). Both die types feature Hornady's self-centering decap spindle with an o-ring spindle tensioner and their elliptical expander ball with headed decap pin—the same robust components found in their Custom Grade Dies. The self-centering design ensures the bushing stays true throughout the sizing stroke, maintaining the concentricity that separates good loads from great ones.

If you're already running Hornady Match Grade dies or considering the system, this .292" bushing gives you the flexibility to adjust neck fit without buying new dies. It's a simple, affordable way to optimize your reloading for tighter groups and longer case life.

Frequently Asked Questions

Will the .292" bushing work with my Hornady Match Grade dies?

Yes. This bushing is designed as an interchangeable component for Hornady Match Grade dies, including both the Full Length and Neck sizing versions. The bushing installs directly into your existing die.

What does the .292" size mean?

The .292" dimension refers to the inside diameter of the bushing, which determines the final neck diameter of your sized cases. Hornady offers bushings in .002" increments so you can select the size that produces your desired bullet fit and neck tension.

Can I change bushings between loads?

Yes. The Match Grade bushings are interchangeable, so you can swap them out to adjust neck sizing for different bullet diameters or desired tension levels. Hornady produces them in .002" increments to accommodate a range of applications.

Does this come with a die?

No, this is a bushing only. You'll need a Hornady Match Grade Full Length or Neck Die to use it.