Hornady Match Grade Bushing .279"
$23.63
$24.99
(You save
$1.36
)
The Hornady Match Grade Bushing .279" is a precision neck sizing bushing designed for reloaders who demand consistency and control over case neck tension. If you're running Hornady Match Grade dies and want to dial in the exact neck clearance for your bullets, this bushing is your tool. The .279" diameter fits within Hornady's bushing system, which uses interchangeable sizes in .002" increments, letting you fine-tune neck sizing to match your specific bullet and brass combination without over-working your cases.
Neck sizing brass correctly is one of the overlooked keys to consistent accuracy and case longevity. Oversizing a case neck work-hardens the brass faster and shortens its life; undersizing can cause inconsistent bullet tension and runout. The self-centering design of Hornady's bushings ensures the case neck stays centered during sizing, which means more uniform tension across your round and less variation round-to-round. This bushing works with both the Match Grade Full Length Die (which sizes body, bumps shoulder, and necks in one stroke) and the Match Grade Neck Die (neck sizing and shoulder bump only).
Like all Match Grade dies, this bushing pairs with a self-centering decap spindle and o-ring tensioner for smooth, reliable decapping. The system uses the same elliptical expander ball and headed decap pin found in Hornady's Custom Grade dies—proven components trusted by competitive shooters and precision handloaders. If you're already invested in Hornady's Match Grade platform or considering it for long-range hunting or match ammunition, having the right bushing size on hand is a small investment that pays dividends in consistency.
Key Features
- Interchangeable bushing design for precise neck sizing control
- Self-centering construction ensures uniform neck sizing
- .279" diameter bushing size (part of .002" increment system)
- Compatible with Hornady Match Grade Full Length and Neck Dies
- Allows you to match neck tension to your specific bullet and brass
- Reduces case neck work-hardening from over-sizing
Specifications
| Bushing Diameter | .279" |
| Bushing Increment System | .002" increments |
| Compatible Dies | Hornady Match Grade Full Length Die, Hornady Match Grade Neck Die |
| Decap System | Self-centering spindle with o-ring tensioner |
Frequently Asked Questions
What dies does the .279" bushing work with?
This bushing is designed for Hornady Match Grade dies, including both the Full Length Die and the Neck Die. It fits into the interchangeable bushing system on these dies to control neck sizing.
Why would I need different bushing sizes?
Different bushing diameters let you adjust how tightly the die sizes your case neck, which controls the tension on your bullet. Smaller bushings size the neck down more; larger bushings leave more clearance. By selecting the right size for your bullet and brass, you avoid over-sizing and maintain consistent tension shot to shot.
How does a bushing die prevent over-sizing?
Instead of a fixed sizing button, a bushing die uses an interchangeable bushing with a specific inside diameter. You select the size that matches your desired neck clearance, so the die can only size down to that bushing diameter—no more, no less. This eliminates the guesswork and protects your brass from unnecessary work-hardening.
Is this bushing self-centering?
Yes. The bushing itself is self-centering, which means it automatically centers the case neck during sizing. This design ensures uniform sizing around the entire neck diameter, improving consistency and runout from round to round.
