Hornady Custom Grade Series V Expander Die .350 Legend .355"

The Hornady Custom Grade Series V Expander Die for .350 Legend is a precision reloading die engineered to smooth out one of handloading's most repetitive steps. If you're working up loads for the .350 Legend and want to eliminate the friction—literally—of mouth expansion before powder and bullet seating, this expander die does exactly that: it widens the case mouth uniformly so powder goes in cleanly and bullets seat without resistance. It's a small tool with an outsized impact on workflow, especially when you're running volume through your reloading press.

The .355" opening is sized for .350 Legend straight-walled cases, so you're getting a die that matches your cartridge without compromise. Hornady's Custom Grade line is built on the principle that reloading tools should last a lifetime—precision-machined surfaces, tight tolerances, and straightforward adjustments mean this die will be part of your bench for decades. It's not fancy, and it doesn't need to be. It does one job and does it well.

Whether you're prepping brass for hunting loads or zeroing in on loads at the range, adding an expander die to your die set cuts fumbling and inconsistency out of the process. For .350 Legend shooters serious about efficiency and repeatability, it's a logical step.

Key Features

• Precision-machined construction for smooth, consistent case mouth expansion
• Sized specifically for .350 Legend straight-walled cases (.355" specification)
• Simple adjustment mechanism for easy setup and fine-tuning
• Built to Hornady's exacting standards for long-term durability

Specifications

Frequently Asked Questions

What caliber is this expander die sized for?

This die is machined for .350 Legend straight-walled cases with a .355" mouth opening specification.

How does an expander die fit into my reloading sequence?

An expander die widens the case mouth after sizing, preparing it to accept powder and a bullet. It works as a separate step in the reloading process before your powder measure and bullet seating die.

Is this compatible with all reloading presses?

Hornady reloading dies work with standard 7/8"-14 threaded reloading presses; check your press specifications to confirm compatibility.

Will this die work on my straight-walled cases?

Yes—expander dies are designed specifically for straight-walled cases like .350 Legend, and this die is sized accordingly. It will not function on bottleneck cartridges.