Forster 7 Prc Bushing Full Length Sizer Die

The Forster 7 PRC Bushing Full Length Sizer Die gives reloaders precise control over neck tension while sizing the body and shoulder in a single pass. If you're working up loads for a 7 PRC rifle and want to dial in case preparation that matches your chamber's exact specs, this die lets you fine-tune that critical neck-sizing pressure independently—something standard dies simply can't do. The bushing system is the key: it surrounds the case neck during sizing, limiting how much the brass is worked and reducing the fatigue that shortens case life.

Shoulder and body sizing happens efficiently, bumping the shoulder back just enough to chamber freely in a minimum-sized SAAMI 7 PRC chamber without excessive sizing that wastes brass or demands extra resizing cycles. This precision approach can tighten your round-to-round consistency and extend the number of reloads you'll get from each case—two major wins for precision handloaders and high-volume shooters alike. The Forster bushing system has a solid reputation for repeatability, and it's built for the reloader who understands that case prep is half the accuracy battle.

Compatible with standard reloading presses, the die threads into most single-stage and progressive setups. You'll want to pair it with Forster's bushing selection to dial in the exact neck tension your 7 PRC loads demand, but the adjustability is what sets this die apart from one-size-fits-all solutions.

Key Features

• Adjustable bushing system for independent neck tension control
• Full-length sizing of body and shoulder in one operation
• Minimizes case working for extended case life
• Sizes to SAAMI chamber specifications
• Precision engineered for handloaders and match shooters

Specifications

Frequently Asked Questions

What's the advantage of a bushing die over a standard full-length sizer?

A bushing die lets you adjust neck tension independently from body and shoulder sizing. Standard dies resize the entire case as one unit, often over-working the neck. The Forster bushing system controls exactly how much the neck is reduced, which reduces brass fatigue and improves accuracy when loads are tuned to that tension.

Will this die work in my reloading press?

The Forster bushing full-length sizer is designed to work with standard reloading presses, including single-stage and progressive models. It threads into standard die-mounting stations.

Do I need to buy bushings separately?

The bushing system is adjustable, but you'll want to select the proper bushing size for your specific chamber and desired neck tension. Forster offers bushings in various sizes; which one you need depends on your rifle's chamber tolerance and your preferred sizing approach.

What caliber is this die for?

This die is chambered for the 7 PRC cartridge.