Forster 6 Cm Bushing Full Length Sizer Die Kit W/ Bushings 274 272 270

The Forster 6 CM Bushing Full Length Sizer Die Kit gives precision reloaders independent control over neck tension while sizing the body and shoulder in one shot. If you're working up loads for 6 Creedmoor and want to dial in exactly how much your cases get sized—rather than accepting whatever a standard die imposes—this system lets you do it. The kit ships with three bushings (274, 272, and 270 diameter) so you can find the right fit for your brass and chamber.

This approach matters because it keeps your case neck from working harder than necessary. A standard full-length sizer compresses the entire neck uniformly; a bushing die instead lets you size just enough to get a solid fit in your chamber, with the bushing setting the limit. That translates to less case deformation and longer case life—important when quality brass costs real money. The body and shoulder still get sized down to SAAMI minimums so your rounds will chamber reliably, but your neck gets treated with more finesse.

Reloaders who care about consistency and longevity appreciate the Forster approach. Whether you're chasing tight groups at the range or building ammo for hunting season, having bushings on hand means you can adjust your neck sizing on the fly as brass work-hardens or you switch between rifles. It's the kind of control that separates dialed-in reloading from just going through the motions.

Key Features

• Independent neck sizing control via bushing system
• Full-length body and shoulder sizing in one stroke
• Three bushings included (274, 272, 270 diameter)
• Sized for 6 Creedmoor (6 CM)
• Reduces unnecessary case neck working and extends case life
• Enables consistent neck tension from round to round

Specifications

Frequently Asked Questions

What does a bushing sizer die do differently from a standard full-length sizer?

A standard full-length die sizes your entire case neck uniformly to a fixed dimension. A bushing sizer lets you choose the bushing diameter, so you can set the neck opening to whatever tension suits your brass and chamber. This reduces unnecessary working of the case neck, which extends case life and can improve consistency.

What caliber is this die for?

This die kit is sized for 6 Creedmoor (6 CM).

What bushings come in the kit?

The kit includes three bushings: 274, 272, and 270 diameter. These allow you to tune neck tension by selecting the bushing that works best for your specific brass and chamber.

Can I use this die if I'm new to reloading?

A bushing full-length sizer is typically used by reloaders who have some experience and want to fine-tune their ammunition. It gives you more control but requires understanding how to select the right bushing for your setup. If you're just starting out, a standard full-length sizer die may be easier to learn with.