The EGW Savage 93 scope base is a one-piece Picatinny rail built to turn your Savage 93 into a modern, flexible optics platform without any gunsmithing. Drilled to match the factory scope mount holes on the Savage 93 receiver, this base accepts both Picatinny and Weaver rings, giving you real freedom in scope selection and eye relief adjustment. The 20 MOA elevation built into the rail opens up longer-range possibilities for rimfire hunting or precision shooting without requiring a separately angled base.
Built from 6061 T6 aluminum and precision machined to MIL-STD 1913 Picatinny specs (±.002"), the EGW base is rigid and reliable. The milled center channel reduces weight without compromising strength, and the full-width cross-slots are gauged for perfect compatibility with standard tactical rings. Installation is straightforward—just drill to the factory holes, apply blue threadlocker to the included socket head Torx screws, and torque to 20 inch-pounds. The kit includes the wrench you need to get the job done right.
If you're running a Savage 93 for rimfire hunting, plinking, or competition, this base unlocks modern scope mounting flexibility. It's the kind of upgrade that transforms a classic action into a true modern rifle without permanent modification or custom fitting.
Key Features
- One-piece Picatinny rail—no drilling or tapping required; uses factory scope mount holes
- Accepts Picatinny or Weaver scope rings for maximum ring compatibility
- 20 MOA elevation built into the rail for extended-range capability
- Lightweight design with milled center channel for weight reduction
- Precision-machined 6061 T6 aluminum, MIL-STD 1913 gauged to ±.002"
- Includes socket head Torx screws and wrench; requires 20 inch-pounds torque and blue threadlocker
Specifications
| Fit | Savage 93 (1-5/8" ejection port) |
| Material | 6061 T6 extruded aluminum |
| Rail Standard | Picatinny (MIL-STD 1913) |
| Rail Elevation | 20 MOA |
| Ring Compatibility | Picatinny or Weaver |
| Mounting Method | Factory receiver holes (no drilling or tapping) |
| Finish | Black |
| Includes | Socket head Torx screws and wrench |
| Recommended Torque | 20 inch-pounds |
Frequently Asked Questions
Will this work with my Savage 93?
Yes, this base is drilled to fit the factory scope mount holes on the Savage 93 receiver. It accommodates the 1-5/8" ejection port size. No additional drilling or tapping is required.
What rings do I need?
The EGW base accepts both Picatinny and Weaver scope rings, so you have options depending on what you already own or prefer.
What does the 20 MOA do?
The 20 MOA elevation angle built into the rail tilts the scope upward, allowing your rifle's elevation turret to reach farther distances without maxing out. This is useful for extended-range rimfire hunting or competition shooting.
What comes in the box?
The base includes socket head Torx screws and the wrench needed to install them. You'll need to apply blue threadlocker and torque the screws to 20 inch-pounds as part of installation.
