The EGW Savage 110-116 Round Back Long Action 30 MOA scope base brings modern Picatinny rail mounting to your Savage bolt gun without drilling or tapping. Built from 7075 T6 aluminum and machined to MIL-STD 1913 specs, this one-piece base fits directly into your factory scope mount holes and gives you the flexibility to run any Picatinny or Weaver-compatible rings. That 30 MOA built-in angle means you're set for long-range hunting and precision shooting right out of the box—no shims needed if you're stretching your shots past 600 yards.
The heavy-duty profile sits 0.100 inches lower than lightweight alternatives, keeping your optic closer to the bore for a flatter sight picture and faster target acquisition in the field. Whether you're dialing in a variable power scope or a red dot on a scout rail, the Picatinny slots give you infinite eye relief adjustment and fast, repeatable repositioning. The toolless design means you can swap rings and glass without pulling the base off your receiver—a huge time-saver at the range or in camp.
EGW machines these from extruded aluminum stock with full-width cross-slots gauged tight (±0.002 inch tolerance) to keep your rings locked solid. Every base ships with socket head Torx screws and the wrench you need to install it. The manufacturer recommends 20 inch-pounds of torque and a small drop of blue Loctite on the fasteners for a permanent, secure fit.
Key Features
- One-piece Picatinny rail base—no drilling or tapping required
- Fits Savage 110-116 round back long action factory scope mount holes
- 30 MOA elevation built in for extended-range hunting and precision shooting
- Heavy-duty 7075 T6 aluminum construction, 0.100" lower profile
- MIL-STD 1913 slot-and-rail spacing (±0.002" tolerance)
- Accepts any Picatinny or Weaver compatible scope rings
- Toolless eye relief adjustment—fast ring repositioning
- Includes socket head Torx screws and installation wrench
Specifications
| Brand | EGW |
| Compatibility | Savage 110-116 Round Back Long Action |
| Mount Type | One-piece Picatinny rail base |
| Built-in Elevation | 30 MOA |
| Material | 7075 T6 extruded aluminum |
| Height Profile | Heavy-duty (0.100" lower than lightweight models) |
| Rail Standard | MIL-STD 1913 Picatinny (±0.002" tolerance) |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Installation | Fits factory scope mount holes; no drilling or tapping |
| Fasteners Included | Socket head Torx screws and wrench |
| Recommended Torque | 20 inch-pounds with blue Loctite |
Frequently Asked Questions
Will this base fit my Savage 110 or 116?
Yes. The EGW base is engineered to fit Savage 110-116 round back long action receivers and uses the factory scope mount holes—no gunsmithing required.
Can I use this for long-range hunting?
Absolutely. The 30 MOA built-in angle supports extended-range hunting and precision shooting applications. You won't need to add shims or worry about running out of elevation in your scope's turrets when stretching shots to distance.
What scope rings do I need?
Any rings compatible with Picatinny or Weaver rails will work with this base. That gives you the freedom to choose rings that fit your budget and your scope's tube diameter.
What comes in the box?
The base ships with socket head Torx screws and the wrench needed to install it on your rifle. EGW recommends using blue Loctite on the fasteners and torquing to 20 inch-pounds for a secure, permanent fit.
