The EGW Sako TRG M995 scope base brings serious versatility to your Sako TRG rifle platform. This one-piece Picatinny rail mounts directly to your TRG's factory receiver holes—no gunsmithing required. By integrating a standard Picatinny interface into a single, rigid base, you gain the freedom to swap scopes and rings without losing zero, and you can dial in your eye relief exactly how you want it. That flexibility matters whether you're dialing in a precision optic for long-range work, experimenting with different magnifications, or simply future-proofing your setup.
Built from 7075 T6 extruded aluminum, the M995 is precision-machined to MIL-STD 1913 Picatinny specs (±.002"), so any Picatinny or Weaver ring will fit consistently and hold tight. The .100" lower profile compared to EGW's lightweight mounts keeps your optic closer to the barrel centerline, which can help tighten groups and reduce parallax effects—a real advantage on a precision platform like the TRG. Cross-slots are gauged to spec across the full width, delivering the rock-solid repeatability you expect from a dedicated rifle base.
Installation is straightforward: drill holes are pre-located to match your TRG's receiver. The package includes socket-head Torx screws and the wrench you need; EGW recommends 20 in-lbs of torque and a small amount of blue loctite to keep everything locked down. Once mounted, this base won't let you down on the bench or in the field.
Key Features
- One-piece Picatinny rail—no drilling or tapping required
- MIL-STD 1913 cross-slot spacing (±.002") for consistent ring fit
- Precision machined from 7075 T6 extruded aluminum for rigidity and durability
- 0.100" lower profile to keep optics closer to barrel centerline
- Accepts standard Picatinny or Weaver scope rings
- Factory-hole drilled for direct fit to Sako TRG receiver
- Includes socket-head Torx screws and installation wrench
Specifications
| Brand | EGW |
| Platform Fit | Sako TRG |
| Model | M995 |
| Mount Type | One-piece Picatinny base |
| Rail Standard | MIL-STD 1913 Picatinny |
| Cross-Slot Tolerance | ±0.002" |
| Material | 7075 T6 extruded aluminum |
| Profile Height vs. Lightweight | 0.100" lower |
| Ring Compatibility | Picatinny and Weaver |
| Installation | No drilling or tapping; uses factory receiver holes |
| Fasteners Included | Socket-head Torx screws with wrench |
| Recommended Torque | 20 in-lbs |
Frequently Asked Questions
Will this base fit my Sako TRG without modification?
Yes. The M995 is drilled to match the factory scope mount holes on Sako TRG receivers, so installation requires no drilling or tapping. You'll need a socket-head Torx wrench (included) and a small amount of blue loctite, torqued to 20 in-lbs.
What scope rings does this Picatinny base accept?
Any standard Picatinny or Weaver scope rings will work with the M995. The rail is machined to MIL-STD 1913 specs, so rings will fit consistently.
How does the height of the M995 compare to other EGW bases?
The M995 is 0.100" lower than EGW's lightweight mounts. This lower profile keeps your optic closer to the barrel centerline, which can improve accuracy and reduce parallax effects on a precision rifle.
Can I adjust eye relief with this base?
Yes. Because it's a one-piece Picatinny rail, you can slide your scope rings forward or backward along the slots to find your ideal eye relief. The Picatinny interface allows fast, simple adjustments without losing zero.
