The EGW Remington XP 100 and Model 7 scope base gives you a rock-solid one-piece Picatinny rail for your receiver-mounted rifle without the hassle of drilling and tapping. If you're building a precision rig or upgrading an older platform, this heavy-duty scope mount bridges the gap between legacy dovetail or factory holes and modern optic systems. It's machined from 7075 T6 aluminum—the same stuff you'd find in aircraft structures—and indexed to MIL-STD 1913 Picatinny specs, so your rings and optics will sit exactly where you aim them, shot after shot.
The four-hole configuration threads directly into your receiver's existing factory mount holes, meaning zero gunsmithing required. Cross-slots are gauged to +/-.002\" tolerance, ensuring that any Picatinny or Weaver ring you bolt on will maintain consistent eye relief and repeatability. The heavy-duty profile runs 0.100\" lower than lightweight alternatives, keeping your scope closer to the bore and shaving ounces where it matters—all without sacrificing the rigidity that long-range shooting demands. Whether you're dialing in a hunting scope or running a precision target setup, this base gives you the flexibility to swap optics or adjust mounting without tearing down your zero.
Setup is straightforward: the mount ships with socket head Torx screws sized to your receiver and includes the wrench you need. EGW's recommendation is simple—20 inch-pounds of torque and a drop of blue Loctite to keep everything locked in place through recoil and field use. Built for shooters who don't cut corners.
Key Features
- One-piece Picatinny rail—no drilling or tapping required
- Four-hole configuration fits factory Remington XP 100 and Model 7 receiver holes
- Machined from 7075 T6 aluminum for maximum rigidity and minimal weight
- Accepts both Picatinny and Weaver scope rings for optic flexibility
- MIL-STD 1913 slot spacing (±.002" tolerance) ensures precise positioning
- Heavy-duty profile positions scope closer to barrel centerline for improved accuracy
- Includes socket head Torx screws and wrench
Specifications
| Rifle Platform | Remington XP 100, Model 7 | |
| Mount Style | One-piece Picatinny rail | |
| Hole Configuration | 4-hole | |
| MOA | 0 MOA | |
| Material | 7075 T6 aluminum | |
| Ring Compatibility | Picatinny and Weaver rings | |
| Included Fasteners | Socket head Torx screws (#6) and wrench | |
| Recommended Torque | 20 inch-pounds |
Frequently Asked Questions
Will this scope base fit my Remington XP 100 or Model 7?
Yes—it's drilled to match the factory scope mount holes on these receivers. Simply bolt it down to your existing holes with the included Torx screws.
What scope rings do I need?
The base accepts both Picatinny and Weaver rings, so you have flexibility with most modern optic mounting systems.
Does this base require gunsmithing to install?
No. It uses the factory four-hole pattern on your receiver, so installation is straightforward with no drilling or tapping needed.
What's included and how do I secure it?
The mount comes with socket head Torx screws and the wrench to install them. EGW recommends torquing to 20 inch-pounds and applying a small drop of blue Loctite to the fasteners for security under recoil.
