The EGW Kimber 84 Short Action scope base brings modern Picatinny rail mounting to your Kimber 84 receiver without the hassle of drilling or tapping. If you're running a Kimber bolt-action and want the flexibility to dial in eye relief, swap optics, or integrate with tactical rings and accessories, this one-piece mount cuts out the guesswork. It bolts directly into your factory scope holes and accepts both Picatinny and Weaver-compatible scope rings—giving you real choice in your setup.
Built from 7075 T6 aluminum and precision-machined to tight tolerances, the EGW base is engineered for durability and repeatability. The cross-slots are gauged to MIL-STD 1913 specs (±.002"), which means your rings will sit consistently shot after shot. At 0 MOA, this is a straight base with no built-in cant, ideal for most mid-to-long-range hunting and range applications where your scope will handle all the angle of fire correction.
Installation is straightforward—the base is drilled to match your Kimber 84's receiver holes. EGW supplies socket head Torx screws and the wrench you'll need; just apply 20 inch-lbs of torque and a small amount of blue loctite for a permanent, rock-solid zero.
Key Features
- One-piece Picatinny rail base—no drilling or tapping required
- Fits Kimber 84 short-action receivers directly into factory scope holes
- Accepts Picatinny or Weaver scope rings for broad compatibility
- Precision-machined 7075 T6 aluminum for strength and rigidity
- MIL-STD 1913 cross-slot spacing (±.002" tolerance) for repeatable ring seating
- Includes socket head Torx screws and installation wrench
- 0 MOA—straight mounting orientation
Specifications
| Brand | EGW |
| Firearm Fit | Kimber 84 Short Action |
| Mount Type | One-piece Picatinny rail base |
| Angle of Incline | 0 MOA |
| Material | 7075 T6 extruded aluminum |
| Ring Compatibility | Picatinny or Weaver |
| Cross-Slot Tolerance | ±.002" (MIL-STD 1913 spec) |
| Installation | Factory scope hole mounting |
| Hardware Included | Socket head Torx screws and wrench |
| Recommended Torque | 20 inch-lbs |
Frequently Asked Questions
Will this mount work with my Kimber 84?
Yes—this base is drilled to fit the factory scope mount holes on Kimber 84 short-action receivers, so installation requires no drilling or tapping.
What scope rings do I need?
The base accepts any Picatinny or Weaver scope rings, giving you flexibility in ring choice and price range.
What comes in the box?
You get the aluminum base, socket head Torx screws for mounting, and the installation wrench. EGW recommends 20 inch-lbs of torque and blue loctite (not included) to secure the base.
Is this mount angled for long-range shooting?
No—this is a 0 MOA base with no built-in angle of incline. Your scope turrets will handle all elevation correction for hunting and range shooting.
