CZ-USA CZ Bren 2 Ms 7.62x39 9" AR Pistol - 91460 (Black)
- Capacity-Rounds:
- 30
- Caliber-Gauge:
- 7.62x39mm
- Barrel Length:
- 9.5"
- Barrel Length Range:
- 9" to 9.99"
- OAL:
- 20.70"
- Weight:
- 5.46 lbs
- Action:
- Semi-Auto
- Safety:
- Ambidextrous
- Sights:
- Adjustable Folding Front & Rear
- Weight Range:
- 5 lbs to 5.99 lbs
- Grips:
- Black Polymer
The CZ Bren 2 Ms 7.62x39 9" AR pistol brings modern ergonomics and serious engineering to a compact platform. Built on a clean-sheet design that departs from the earlier 805 Bren, this rifle-caliber pistol delivers the familiar controls of an AR platform in a distinctly CZ package. If you're looking for a short-barreled 7.62x39 that handles like an AR but brings Czech military-grade engineering to the table, the Bren 2 Ms is worth a hard look.
Weight savings are everywhere on this gun. The receiver is aluminum, and the lower is cut from carbon fiber-reinforced polymer—a combination that keeps the whole rig at just 5.46 lbs despite its rifle caliber. The charging handle is non-reciprocating, staying tucked forward until you need it, and it pivots left and right as a forward assist. You'll find ambidextrous controls throughout: the safety, magazine release, and bolt catch/release are all mirrored, with an extra catch built into the front of the trigger guard. For anyone who's run an AR, the controls will feel at home.
Chambered in 7.62x39, this pistol feeds from factory CZ magazines with 30-round capacity, ensuring proper last-round hold-open and reliable feeding. The cold hammer-forged barrel is 9.05 inches, and the gun ships with folding adjustable sights. The modular forend accepts swappable lengths, and the rear features a flush plate with provisions for an AR-style buffer tube—so you can add an arm brace, cheek rest, or stabilizing device to suit your setup. At 20.7 inches overall, it's compact enough to maneuver in tight spaces while packing serious capability.
The stippled grip is textured for control, and the whole platform is designed to be swappable to different barrel lengths and chamberings down the road. This is a shooter's gun, not a marketing exercise.
Key Features
- Chambered in 7.62x39 with 30-round magazine capacity
- Cold hammer-forged 9.05-inch barrel
- Lightweight aluminum receiver and carbon fiber-reinforced polymer lower
- Ambidextrous controls: safety, magazine release, and bolt catch/release
- Non-reciprocating charging handle that doubles as forward assist
- Folding adjustable sights
- Modular forend with swappable lengths
- Rear flush plate with provision for AR-style buffer tube and stabilizing devices
- Stippled grip texture
- Field-swappable to different barrel lengths and chamberings
Specifications
| Caliber | 7.62x39 |
| Barrel Length | 9.05 inches |
| Overall Length | 20.7 inches |
| Weight | 5.46 lbs |
| Magazine Capacity | 30 rounds |
| Magazine Type | Detachable (CZ factory magazines) |
| Receiver | Aluminum |
| Lower | Carbon fiber-reinforced polymer |
| Barrel Type | Cold hammer-forged |
| Sights | Folding adjustable |
| Safety | Ambidextrous manual |
| Grip | Stippled |
| Charging Handle | Non-reciprocating, ambidextrous |
Frequently Asked Questions
Can I add an arm brace or stabilizing device to the Bren 2 Ms 7.62x39?
Yes. The pistol ships with a flush rear plate that has provision for attaching an AR-style buffer tube, so you can mount an arm brace, cheek rest, or similar pistol stabilizing device. You can also remove the rear plate entirely and replace it with a factory folding or adjustable stock if you plan to SBR the platform.
What magazines does this pistol use?
The Bren 2 Ms in 7.62x39 uses factory CZ magazines with 30-round capacity. This magazine type ensures proper last-round hold-open and consistent feeding with the 7.62x39 chambering.
Is the Bren 2 Ms ambidextrous?
Yes. The safety, magazine release, and bolt catch/release are all ambidextrous. The charging handle is also swappable from side to side and doubles as a forward assist.
Can I swap barrels and chamberings on the Bren 2 Ms?
The Bren 2 platform is designed to be swappable to different barrel lengths and chamberings. The modular forend can also accept different lengths, though specific compatibility and installation details should be confirmed with CZ-USA or your dealer.
Firearm Shipments:
To buy rifles or shotguns, you must be 18 years old, and for handguns, actions, or receivers, the minimum age is 21. By placing an order for this firearm, you confirm that you are the legitimate transferee/buyer, meet the legal age requirements, and comply with all Federal, State, and local laws and regulations necessary to purchase this firearm.
We only ship firearms to valid Federal Firearms License (FFL) holders. At checkout we provide a FFL locator for your convenience.
We will need a copy of the FFL’s license to facilitate the process, kindly request your dealer to email us a copy of their FFL, as we cannot dispatch the firearm until we receive this document. It is imperative for the buyer to choose their FFL dealer, ensure they are willing to facilitate the transfer, and have them email their FFL copy to BOSQUE Outdoors. To avoid any confusion, the customer's name or order number must be mentioned in the email containing the FFL.
Email: [email protected]
- Prior to placing an order, it is the buyer's responsibility to understand and adhere to their state's firearm regulations.
- The buyer should verify with their receiving dealer that the chosen firearm is legally permissible in their state.
- The buyer is accountable for any transfer fees or background check charges imposed by the receiving dealer. If the designated dealer declines to accept the firearm delivery, the buyer assumes responsibility for shipping costs to retrieve the firearm and resend it to an accommodating dealer.
- Handguns will be shipped using air transportation, while long guns can be shipped using ground methods. If your order includes a mix of firearm and non-firearm items, BOSQUE Outdoors will send the firearm(s) to your selected FFL dealer and the remaining non-firearm items to your billing address.
- Firearms cannot be returned to BOSQUE Outdoors; please contact the manufacturer for warranty claims.
- Firearms refused by the FFL Dealer or which cannot be transferred due to a failed background check are subject to a $75 restocking fee plus 10% of the purchase price.

