The Caldwell Lead Sled shooting rest is built for shooters who want rock-solid stability at the bench without fighting recoil. Whether you're zeroing a new rifle, load testing, or putting in serious practice time, this weight-forward shooting rest absorbs punishment so you can focus on your groups. The Lead Sled uses a simple but effective strategy: heavy mass to tame recoil by up to 95 percent, keeping your gun settled on target shot after shot.
The design centers on two key areas: a skeletonized front rest that clamps your rifle securely with non-marring contact surfaces, and a rear cradle fitted with Caldwell's Shock Eliminator Technology to soak up recoil energy. The front rest delivers precision elevation adjustment with a "no wobble" ram and up to 4 inches of adjustment travel, so you can dial to your zero without hunting for it between shots. The rear cradle is also non-marring, protecting your buttstock while the shock pad works to reduce felt recoil and muzzle jump.
At roughly 15 pounds and measuring 27 inches long by 12 inches wide, it's sized for standard bench shooting. The weight tray accommodates standard 25 lb. barbell weights or lead shot bags, letting you dial in the mass you need for your caliber and shooting style. Micro adjustments at the rear give you fine control for elevation, and the whole platform stays solid—no creep, no shift between rounds.
This is a working tool for shooters serious about precision: hunters verifying zero on their main rifle, reloaders testing ammunition, or shooters chasing tighter groups. If you spend time at the bench, a proper shooting rest turns frustration into data.
| Manufacturer | Caldwell |
| Model | 820310 Lead Sled |
| Type | Weighted Shooting Rest |
| Dimensions | 27" L × 12" W |
| Weight | Approximately 15 lbs. |
| Front Rest | Skeletonized with non-marring material |
| Rear Cradle | Non-marring with Shock Eliminator Technology pad |
| Elevation Adjustment | Up to 4" with precision "no wobble" ram; micro rear adjustment |
| Weight Capacity | Accommodates standard 25 lb. barbell weights or lead shot bags |
| Recoil Reduction | Up to 95% |
The weight tray is designed to accept standard 25 lb. barbell weights or lead shot bags. You can adjust the total mass depending on your rifle's recoil and your preferred stability.
Yes. Both the front rest and rear cradle use non-marring surfaces to keep your rifle safe from dents and scratches during clamping and recoil absorption.
The front rest offers up to 4 inches of elevation travel via a precision ram with no wobble, plus a micro adjustment at the rear cradle for fine-tuning your zero.
Yes. The Caldwell Lead Sled is built for bench shooting applications where you need a stable platform and recoil management—zeroing a hunting rifle, testing ammunition loads, and precision practice are all ideal uses.
Caldwell
Caldwell
